THE IMPORTANCE OF COTTON FABRIC SOURCING AND PREPARATION FOR DIGITAL TEXTILE PRINTING
“Many, may well make a choice using cost as the purchase parameter, but that would not be the wisest move - unless you can be certain of origin and compatibility for digital textile printing. The supply chain for all fabrics, whether to be digitally printed or not, must be researched carefully. Variances in origin, crop, even continent, and the finishing processes that they are subjected to, from fibre to fabric can play havoc with digital textile production.”
WRITTEN BY DEBBIE MCKEEGAN FESPA TEXTILE AMBASSADOR
The Importance of Cotton Fabric Sourcing and Preparation for Digital Textile Printing.
Why does fabric sourcing and preparation play such a vital role in digital textile printing? To the untrained eye, two fabric specifications may well read as identical, physically they look the same and may feel the same, but their manufacture and preparation will not be identical.
Many, may well make a choice using cost as the purchase parameter, but that would not be the wisest move - unless you can be certain of origin and compatibility for digital textile printing. The supply chain for all fabrics, whether to be digitally printed or not, must be researched carefully. Variances in origin, crop, even continent, and the finishing processes that they are subjected to, from fibre to fabric can play havoc with digital textile production.
Cotton is currently mainly digitally printed with two different print processes: Pigment and Reactive inks. Both of these processes share one important feature in common, and that is the requirement for pre-coating prior to digital printing.
However, before we look at coatings, we have to travel upstream into the supply chain, as the manufacturing route of fabrics also has critical importance:
Mercerisation, is where the fabric, after bleaching, has been exposed to a concentrated solution of Caustic Soda (NaOH) to improve properties such as fibre strength, shrinkage resistance, lustre, and dye affinity, and is widely used. In this process, the caustic solution actually re-arranges the cellulose molecules in the fibre to produce structural changes which improve dye uptake and tear strength, to help reduce fabric shrinkage, and to impart a soft lustre.
The result of the mercerisation process is a fabric with a soft handle, consistent whiteness and resistance to shrinkage. Yet the process is expensive - as manufacturers seek ever cheaper sources, and as pigment printing has gained ground, bleaching standards prior to printing for digital textile printing of cotton were relaxed. Bleaching being specified without any important common standards such as consistency of whiteness and total size removal.
The result of this chase to cheapness is that fabric preparation variations have proved to become a matter of serious concern to the digital textile printer.
Where economies were sought in the use of expensive chemicals, such as Hydrogen Peroxide or Sodium Hypochlorite in the continuous bleaching process, the resultant fabrics produced often have variations in whiteness and handle which impact upon the repeatability and attractiveness of the final product.
In attempting to square the circle of whiteness, fabric manufacturers have become increasingly reliant on Optical Brightening Agents (OBA’s) to make up for the deficiencies in their bleaching processes. This introduces another unwelcome variable, because OBA’s have different colorific reflection values and shades, with the result, that the digital textile printer could not guarantee fabric reproduction from one fabric supplier to another – even batches from the same supplier will vary.
This was further compounded as digital pigment printing began to grow in volume, because fabrics have to be pre-coated to increase the colour gamut and durability of the print.
Beyond the bleaching conundrum - the next stage in fabric preparation is the provision of pre-coating. Pre-coating formulations prevent ‘wicking’ which is defined as the random spread or migration of colour after printing. Pre-coating is essential to enable a sharp print mark or register on the surface of the fabric. A wide variety of coating chemicals are now available, which along with different methods of application, from spray to foulard systems, create yet another problem area, particularly with regard to handle and variability in colour reflectivity.
In the early days of digital textile printing, which was largely using reactive inks, many fabrics had extensive pre-treatment to enable the colour gamut of the inks to be as wide as possible. Yet the reactive process had important drawbacks when it came to cost and sustainability. With a complicated process which took a lot longer, the heavy use of energy and water are wasteful, and gradually the industry has turned towards Pigment printing as a eco-friendly solution.
Pigment printing provides a simple process involving printing and thermo-fixation by either a heat press or a fabric baker. However, with pigment printing, pre-coating is also an essential in terms of enhancing the colour gamut and fastness of the fabric.
So faced with the inevitability of pre-coating, volume digital textile printers are faced with two important choices, first the choice of chemicals and second the choice of machinery to pre-coat their fabrics. As far as chemicals are concerned the printer has a wide array of product available. In many cases coating formulations are supplied by Ink manufacturers to pair up with use of their inks.
In this field, major manufacturers include, Epson Genesta Inks Pre-Gen, Neo Coat from Swiss Performance Chemicals and the P601 Pre-Coat from Pigmentinc. However, many chemical companies independently supply excellent pre-coating chemicals, these companies include Lubrizol of the USA, Tanatex of the Netherlands, Rudolf Chemicals of Germany and Sarex of India.
In general terms, these pre-coating formulations, which often use thickeners and cross linking agents, improve the mark and colour intensity of the print, as well as the wash, and rub fastness of the fabric.
Beyond the choice of fabrics and chemicals the volume digital printer then has a wide choice of machinery and process routes available to pre-coat their fabrics prior to print. In simplest terms, the use of a foulard (padding mangle) followed by a stenter is widely used, where the process is either dipped or back coated continuously at speed. Various attachments are now available to improve this process, where non contact or minimum chemical application is used to improve handle over the simple ‘dip’ method of pre-coating.
Leading the way here are the Magnorol from Zimmer of Austria, the TexCoat™ from Baldwin Technologies of the USA and the easyCOAT-DRY from Cibitex of Italy, all of which make effective additions to any Digital textile pre-coating line.
As technology has advanced we now have a number of hybrid solutions, where in-line machines, which work in tandem with the digital textile printing machinery, giving a one-step process.
In the one-step sector the leading lights are Kornit from Israel, Swiftjet of the UK, Mimaki of Japan, and Setema of the Netherlands, all of whom provide one-step solutions for digital textile printing where the pre-coating process is in-line with the printer giving economies of speed and labour cost.
Although the pre-coating sector is an extensive and technically competent arena, a correct and informed choice of machine, process and chemicals, will give the digital textile printer substantial savings of cost, time and labour.
So beyond machinery, and learning a new skill set as a textile technician, how does the digital textile printer deal with this fabric minefield?
The simple answer is to find a reputable fabric supplier, and stick with their product to ensure continuity of fabric quality. This should be backed up with a sensible, but simple in-house fabric testing facility and colour management. Before printing, incoming batches of fabric should be checked for whiteness and thread density using simple instruments available from textile testing suppliers such as James Heal or SDL Atlas (UK).
There are a number of ways to apply colour management technology for consistent digital printing, saving the digital textile printer many hours of sampling and waste. Care must be taken to ensure that colour continuity if achieved between batches. After sample printing, fabric should be checked against approved standard samples using a colour matching cabinet, fabric can also be checked for drape using a crease recovery device – all of these factors must be met to meet client specifications.
The digital textile printer has to create a robust internal testing process and enforce production standards alongside colour management. These actions will deliver a critical measure of certainty and ensure that the printed fabric supplied meets everybody’s expectations.
Colour Is Too Important to Leave to Chance
Print will always be the part of the garment people see first.
But the sum of all parts — the fabric, the trims, the fasteners, the finish — is what determines whether a design actually delivers on its promise. Brands that continue to treat colour as a single creative decision, rather than a coordinated technical discipline spanning their entire supply chain, will keep paying for it in re-dips, delays, and disappointed design teams.
A Century of Textiles, and an Ever-changing World
Few companies can trace their roots back more than a century and still count themselves among their industry's innovators. Texia, headquartered in Monistrol de Montserrat, Spain, is one of them.
But the story of Texia is not simply one of longevity.
It is a story of continual reinvention. As the textile industry has grown more global and competitive, Texia has repeatedly reshaped its business, investing in technology, developing its own brands, and placing sustainability at the centre of its mission. In doing so, it offers a compelling example of how a heritage manufacturer can lead rather than follow through a period of profound industry change. Image Credit: Texia
What are we craving Ultimately?
The instinct to slow down while simultaneously optimising every measurable aspect of life isn't a passing curiosity. It's a structural response to a world that feels increasingly unstable, and it's reshaping what people expect from their homes, hotels, workplaces and healthcare environments alike.
For the design and manufacturing sectors, this means rethinking both product and process.
The Structual Shift is Real and its Already Here
Volumes are moving east, where digital production is accelerating rapidly. Consumer behaviour has shifted.
Demand is now driven by personalisation, shorter buying cycles, and an expectation of near-instant responsiveness. Regulatory pressure is intensifying, with supply chain transparency now a legal and commercial fact in many markets. And margins? They are under sustained, structural pressure.
This is not a temporary disruption. It is a fundamental reordering of how textile manufacturing must operate.
The Challenge: Standing Firm as the Industry Shifts
The wallpaper landscape has changed dramatically. Digital printing has lowered the barrier to entry, spawning countless direct-to-consumer brands and pushing much of the market towards faster, cheaper production.
At the same time, manufacturing in the UK has grown steadily harder - rising minimum wage, national insurance, energy and substrate costs all bear down on margins. Surface Print have embraced all of these challenges - and stand resolutely prepared for the future.
From Helsinki's printing mill to Paris's Le Marais, discover how Marimekko is scaling a design-led brand with purpose, craft, and bold innovation.
But what makes Marimekko's story compelling is not just its aesthetic legacy?
The word "toxic" carries weight. It conjures danger, harm, and things best avoided.
“Yet in the textile industry - Where between 3,000 and 10,000 chemicals move through the supply chain, a reflexive fear of the term is one of our biggest obstacles to progress.”
This article distils the key takeaways and what buyers, designers, and brands should be asking right now.
What Is the Digital Product Passport?
At its core, a Digital Product Passport is a digital record attached to a physical product - For a printed textile product, this means the DPP would capture data on the substrate, inks and dyes used, the printing process and technology, chemical compliance, environmental impact (including water and energy use), supply chain traceability, and end-of-life instructions.
The Market Gap that Changed Everything
Future Fashion was founded in 2019, timed deliberately to coincide with a pivotal moment in global textile technology: the commercial launch of the EFI Reggiani BOLT Single-Pass digital printing system.
The founders recognised that single-pass architecture had fundamentally changed what was industrially possible - and that Pakistan's domestic market had yet to catch up.
Print is no longer defined by the inefficiencies that once characterised it…as advances in production processes and technology have significantly improved its environmental performance.
Taran Rai, Corporate Sustainability Manager at Epson explains why?
The story of what happens when young designers access digital technology is still being written.
What once was a theoretical sustainability goal seems to have shifted into an active regulatory reality.
Is the Textile Market Finally Recovering?
After a difficult few years, there are genuine reasons for optimism. Duncan was candid about the challenges: "The market for textiles has been very difficult over the last three years. I'm not going to hide the truth there. But the tide is turning.“
A profound shift is currently reshaping the sector
Changing consumer expectations demand greater design diversity, faster turnaround times, and sustainable manufacturing practices.
To thrive, interior brands must adapt their supply chains, bringing production closer to the end consumer and moving away from bulk manufacturing.
Digital textile printing offers a definitive solution to these operational bottlenecks.
Digital transformation doesn't announce itself.
It accumulates - one innovation at a time - until an entire industry looks back and realises the ground has shifted beneath its feet. That's precisely where textiles stands today.
The conversations happening now about AI, automation, sustainability, and digital product passports are not theoretical. They are shaping decisions being made on factory floors and in boardrooms right now.
“By leveraging advanced digital textile printing, Marylene Madou has successfully merged traditional craftsmanship with cutting-edge technology. Her approach offers a blueprint for how independent designers can scale their brands globally while maintaining a minimal environmental footprint.”
The textile industry is undergoing a vital transformation. As the insights from Techtextil and Texprocess reveal, the path forward relies on a combination of sustainable hardware, intelligent chemistry, and seamless digital workflows.
From Zimmer's industrial-scale energy reductions and Stratasys's on-demand 3D embellishments, to Kornit's single-step technical printing and the unified digital ecosystems of NedGraphics and Optitex, the tools for change are here. To stay competitive, brands and manufacturers must adopt these innovations, moving away from fragmented, wasteful processes towards a truly connected, circular economy.
Friedmans stands as a testament to the power of combining traditional textile knowledge with forward-thinking innovation.
“Operating from their UK headquarters, Friedmans now serves a diverse array of sectors, including swimwear, dance, entertainment, sportswear, interior decor, prosthetics, and even pet apparel. With a strategic supply chain that reliably serves clients worldwide”
The apparel decoration industry is decisively moving away from isolated, analogue production tools toward connected digital manufacturing environments.
"Kornit’s unwavering commitment to transformative technology continues to disrupt the status quo. For business leaders and innovators ready to capture the future of apparel manufacturing, the path forward is clear”
The Urgent Need for Sustainability at Scale
The transformation at Coats provides a vital blueprint for the wider textile and apparel sector. True sustainability cannot be achieved in silos. As Dearing emphasised:
“Cross-industry collaboration is the engine of meaningful change. Brands, machinery suppliers, chemical providers, and fibre producers must act as an interconnected ecosystem”
Today’s customers demand superior product quality, real-time data visibility, and lightning-fast turnaround times.
For large-scale garment decorators, managing these expectations while balancing seasonal demand fluctuations - such as the massive surges seen during Black Friday - presents a monumental challenge.
"Relying on transactional vendor relationships and outdated legacy equipment is no longer sufficient to secure long-term stability and growth.”
Printing method is never a secondary detail. It shapes the entire life cycle of a product, from concept to customer. In today’s fashion industry, where margins are tighter and speed matters more than ever, technical knowledge has become a competitive advantage.
“The future of textile design belongs to professionals who can combine creativity with execution, aesthetics with practicality, and vision with production reality”.
Shanghai, China – August 2026 – Intertextile Shanghai Apparel Fabrics – Autumn Edition 2026 is set to open its doors on 25 August at the National Exhibition and Convention Center (Shanghai), welcoming thousands of global industry players across three days of sourcing, networking, and trend forecasting.
Spanning 240,000 sqm, the edition will feature over 3,500 exhibitors from 30 countries and regions, organised under four key pillars: Fashion Forward, Performance Textiles, Sustainability, and Textile Future.
From 27 September 2026, stricter rules against greenwashing and higher requirements for sustainability labels will take effect in the European Union.
OEKO-TEX® has taken the new provisions as an occasion to further develop its governance structure.
In doing so, OEKO-TEX® not only meets the requirements of the EU Directive on Empowering Consumers for the Green Transition (EmpCo, EU 2024/825) but also prepares itself for future regulatory developments.
Munich, Germany – August 2026 – PERFORMANCE DAYS is set to premiere the Sustainability Exchange at its upcoming trade fair, taking place 13–14 October 2026 in Munich.
The new dedicated space brings together leading voices across certification, compliance, circularity, and collaboration to help industry professionals translate complex sustainability challenges into practical solutions.
New Delhi, India – August 2026 – IKEA, the global home furnishing retailer, has announced its partnership with the Regenerative Cotton Accelerator Programme (RCAP) as a strategic member.
The partnership will see IKEA join RCAP's Steering Group, contributing its cotton sourcing and supply chain expertise to accelerate the adoption of regenerative cotton across India.
Launched in February 2026, RCAP is a joint initiative by Solidaridad Asia, WWF-India, Regenagri and Control Union..
The invention, a dark adsorbent material that can be added to wastewater and separated with a magnet, builds on the team’s 2022 breakthrough in microplastics removal, extending performance to much smaller particles and more complex wastewater.
Microplastics are an increasing global concern, with growing evidence of their presence in water systems.
The researchers say the ability to remove micro‑ and nano‑plastics under practical conditions sets this work apart.
Winterthur – Switzerland - July, 2026 – Recycling Powerhouse Ltd. was established in July 2026 to industrialize, standardize and scale textile recycling.
Based in Switzerland, the venture will operate a franchise-driven business model that enables the production of high-quality, certified recycled yarns.
The project is supported by the following partners: Rieter Group, the world’s leading system supplier for natural and man-made fibers, Säntis Textiles, a Swiss textile engineering company, and Valvan, a Belgian sorting technology company.
Singapore, July 2026 – DyStar, a leading specialty chemicals company with more than a century of expertise in product development and innovation, today announced the release of its FY2025 Sustainability Report, marking a significant milestone in its sustainability journey and reinforcing its commitment to long-term value creation
Germany, France and the Netherlands are advocating coordinated European action against ultra-fast fashion.
The three Member States raised the topic at today’s EU Environment Council in Luxembourg, and called on the European Commission to make existing and planned EU provisions more effective against short-lived, low quality textiles.
Their call was supported by other Member States, including Slovenia and Denmark.
LONDON, June 11: Textile Exchange has published its new polyester Life Cycle Assessment (LCA) study, providing robust, accurate, and credible data to strengthen the fashion, textile, and apparel industry’s understanding of the impacts of different types of polyester production.
The study is the second in a series of LCA studies led by Textile Exchange and addresses key gaps and limitations in the LCA data currently available for polyester.
Widnes, Cheshire - 5 June 2026 – On World Environment Day, Roberts Group International has announced a pioneering partnership with St Helens Council, Seamster & Shepherd, and Hope Academy.
The initiative, titled Hope for the Earth: From Reclaimed Textiles to Sustainable Student Fashion Show, empowers students to transform reclaimed textiles into original fashion pieces ahead of a summer showcase event in July.
The collaborative project addresses the urgent need for circularity in the fashion industry by bringing the sustainability message directly into the classroom.
Shenzhen, June 2026 – To address the urgent need for sustainable practices and digital transformation within the global fashion industry, the Intertextile Shenzhen Apparel Fabrics and Yarn Expo Shenzhen will return from 9 to 11 June 2026.
Held at the Shenzhen Convention and Exhibition Center, the event will host over 600 international exhibitors across 45,000 square metres.
The innovative washing process SMART WASH represents a modern, high-performance, and environmentally conscious approach to textile care.
The targeted combination of the products BEIPLEX GREEN, BEICLEAN ECO, BEIPUR ANP, BEIBLEACH WP 35, and BEIACID CIT creates a holistic, sustainable washing and bleaching concept.
Stuttgart, Germany – May 2026 - Global Organic Textile Standard (GOTS) certification continued to grow in 2025, with nearly 18,000 certified facilities worldwide, despite ongoing geopolitical uncertainty and rapidly evolving regulatory requirements across global textile supply chains.
New figures released today in the 2025 Annual Report for Global Standard, the nonprofit that owns and operates GOTS, show that uptake of robust, independently governed sustainability standards remains a priority for companies seeking to manage risk, substantiate claims and meet rising expectations on transparency and due diligence.
Kyocera Document Solutions has highlighted its FOREARTH, a pioneering water-free textile production concept designed to drastically reduce energy consumption and greenhouse gas emissions.
By addressing the critical need for sustainable manufacturing, this innovation sets a new standard for the textile industry, minimising environmental impact while streamlining the entire printing process.
ECCO, in partnership with Spinnova, announces the launch of the limited edition ECCO BIOM® 720, a first-of-its-kind shoe utilising an often overlooked leather by-product, transformed into a protein-based fibre.
The fibres are produced using patented technology that advances material innovation while reducing waste and supporting full resource use across the leather and textile industry.
Newark - Delaware - May 2026 – The global digital textile printing market is set for a substantial transformation, having crossed a valuation of USD 6.1 billion in 2025.
According to recent market forecasts by FMI, the sector is projected to surpass USD 6.6 billion in 2026, expanding at a compound annual growth rate of 7.7 per cent.
Driven by the urgent need for sustainable production and fast fashion customisation, the market is on track to reach a total valuation of USD 13.9 billion by 2036.
Cagliari - Italy – May 2026 – To address the escalating crisis of water scarcity in the Mediterranean basin, the Interreg NEXT MED Programme has officially announced the launch of the SWAMED project.
This international initiative introduces smarter irrigation systems and modern agricultural technology to farming communities across the region. By deploying innovative, data-driven solutions, the project seeks to safeguard the future of agriculture in areas where every drop of water is critical for survival and economic stability.
The SWAMED project is spearheaded by the Università degli Studi della Campania "Luigi Vanvitelli" in Italy, operating in close collaboration with a strategic coalition of partners from Tunisia, Egypt, Greece, and Türkiye.
Washington DC - 24 April 2026 – The Bezos Earth Fund has announced a $34 million commitment to advance breakthrough sustainable materials for the global fashion and textile industry.
Working with leading scientists across the United States, these new grants aim to reinvent the fabrics used in everyday clothing, focusing on next-generation materials that replicate the feel of rayon, silk, and cotton while drastically improving upon the environmental impact of conventional manufacturing.
ISTANBUL, Türkiye – April 2026 – In a critical step towards securing a sustainable and ethical future for the global textile industry, Textile Exchange and the Organic Cotton Accelerator have officially announced the comprehensive agenda for the upcoming Organic Cotton Summit.
This vital industry event is scheduled to take place from the 2nd to the 4th of June 2026 at the Istanbul Marriott Hotel Sisli in Türkiye.
By bringing together global stakeholders, the summit aims to urgently address the pressing challenges facing agricultural supply chains and to build organic cotton systems that are resilient, fair, and economically viable for all participants.
Manchester, UK – April 2026 – John Hogg Technical Solutions has announced a strategic minority equity investment in SwitchDye Limited, a University of Leeds spin-out.
This vital partnership aims to rapidly scale SwitchDye's pioneering CO2-responsive, drop-in dyeing system, answering the urgent industry need to significantly reduce chemical intensity, energy use, and water consumption in the dyeing of polyester and other synthetic fibres.
April 2026 - As sustainability expectations rise across the fashion industry, Lectra has announced the publication of a new document aimed at helping brands reduce their environmental impact while remaining competitive.
The newly released insights detail how fashion brands can overcome the four main barriers to sustainable product development, providing the necessary data clarity to make better, environmentally conscious decisions.
London - April 2026 – In a decisive response to the escalating global need for urgent climate action, Ricoh today announced a comprehensive revision of its environmental, social, and governance targets.
Launched as a cornerstone of its fiscal 2026 mid-term strategy, the company is significantly accelerating its efforts to realise a decarbonised society.
By raising its greenhouse gas emissions reduction goals and renewable energy adoption targets, Ricoh is firmly linking sustainable innovation with its global business operations to lead the industry toward a greener future.
The organisation has elevated its fiscal 2030 target for reducing Scope 1 and 2 greenhouse gas emissions from 63 percent to 75 percent, compared with fiscal 2015 levels.
Zhanjiang, China - 26 March 2026 – BASF today announced the official inauguration of its state-of-the-art Verbund production site in Zhanjiang, Guangdong Province.
Covering four square kilometres, this €8.7 billion facility represents a paradigm shift in sustainable chemical manufacturing.
Fully powered by renewable electricity, the site reinforces BASF’s market position in China whilst addressing the urgent global need for decarbonised industrial processes.
Employing over 2,000 people, the Zhanjiang site produces a highly diversified portfolio of basic chemicals, intermediates, and speciality chemicals.
Stockholm – Sweden – March 2026 – The H&M Foundation has announced the launch of a practical, open-source workshop toolkit designed to help organisations across the textile industry apply its innovative System Map.
Introduced earlier in 2024, the System Map is a visual framework that reimagines the fashion industry as an interconnected ecosystem.
Now, this comprehensive toolkit empowers brands, suppliers, policymakers, and investors to turn systemic insights into actionable strategies, identifying crucial leverage points to halve greenhouse gas emissions every decade until 2050 while enabling a just transition.
March 21st 2026 – To mark the International Day of Forests, Lenzing Group has announced its continued and unwavering dedication to global forest conservation and ecological resilience.
As the world faces unprecedented environmental challenges, the company is taking decisive action to ensure that the preservation of healthy forests remains firmly embedded in its sourcing strategy and product innovations.
San Francisco – March 2026– The Apparel Impact Institute (Aii) has today announced the launch of its innovative Energy and Carbon Benchmark.
This vital new tool is designed to provide fashion brands and their global suppliers with a unified reference point for measuring energy consumption and greenhouse gas (GHG) emissions across textile manufacturing facilities worldwide.
London – March 2026 – The Better Cotton Initiative (BCI) has announced a new collaboration with global non-profit the Soil Health Institute (SHI) and national ag-tech provider Growers Guide to support cotton producers across the United States in strengthening their soil conservation practices.
The partnership will fund intensive on-farm data collection to equip producers with actionable, data-driven insights aimed at improving soil health and reducing chemical inputs.
Amsterdam - March 2026 - Sappi Europe, a leading provider of sustainable paper and packaging solutions, represented the company at this year's AWA Global Release Liner Summit in Amsterdam.
Under the theme of "Innovation and Sustainability," Sappi's Director of Sustainability Sarah Price and Manager of Technology & Development Wolfgang Hoffmann led a well-received session titled "Navigating Sustainability: Accelerating Together."
Nottingham, UK - 6 March 2026 – Worn Again Technologies has announced the start-up of its Textile-to-Fibre Accelerator plant in Winterthur, Switzerland, marking a major step towards commercialising its chemical recycling technology.
The facility provides real-world validation of a process designed to recover and regenerate polyester and cellulose from end-of-life textiles, proving the technical and economic feasibility of polycotton recycling at scale.
Oban – Scotland – February 2026 - OCEANIUM has highlighted OCEAN INK®, the world's first fully biodegradable, water-based ink derived from sustainably farmed seaweed.
This groundbreaking innovation is poised to transform the luxury textile, printing, and packaging industries by offering an eco-friendly alternative to conventional harmful inks.
As industries worldwide face mounting pressure to adopt sustainable practices, OCEAN INK® addresses a critical gap in the market.