Melbourne – Australia – July 2026 -RMIT’s invention, a dark adsorbent material that can be added to wastewater and separated with a magnet, builds on the team’s 2022 breakthrough in microplastics removal, extending performance to much smaller particles and more complex wastewater.
Microplastics are an increasing global concern, with growing evidence of their presence in water systems.
The researchers say the ability to remove micro‑ and nano‑plastics under practical conditions sets this work apart.
Tests also showed removal of large molecules of PFAS compounds, which researchers say may be another promising application, though that part remains at an early stage.
First author Dr Muhammad Haris from RMIT’s School of Engineering said the advance addressed a key gap in water treatment, which was the inability to remove nano-plastics at scale.
“Our material is designed to remove micro‑ and nano‑plastics quickly,” he said.
Putting Removal To The Test
In lab testing, the material removed more than 95 per cent of micro‑ and nano‑plastics, including particles as small as 30 nanometres, within one hour.
The material also removed more than 95 per cent of tested contaminants including mercury, chromium, copper, dyes and ibuprofen.
About 80 per cent were removed in the first 15 minutes, aligning with contact times used in treatment plants.
The material performed across common plastics such as polyethylene, polypropylene and polyester, and in both fresh and saline water.
From Lab To Wastewater
The team tested the material in industrial laundry wastewater, a major source of microplastic pollution from synthetic fibres.
It removed more than 88 per cent of polyester microfibres along with dyes, maintaining performance despite surfactants and organic matter.
A prototype system combining the adsorbent with magnetic separation technology from One Eye Industries in Canada showed the material could be recovered quickly after treatment and reused.
Co-lead researcher Associate Professor Nasir Mahmood from the School of Science said the results supported practical use.
“It worked in realistic water conditions, handled mixed pollutants and could be recovered efficiently,” he said.
“Industry has been waiting for a practical way to move microplastics and emerging contaminants removal out of the laboratory and into real treatment environments,” he said.
“The challenge isn't only capturing these particles, it's recovering the treatment material quickly and reliably after it has done its job, without creating a new waste stream.
“Combining high-performance pollutant capture with proven magnetic separation creates a much stronger pathway to real‑world deployment.”
Professor Nicky Eshtiaghi holds a vial containing the team's magnetic adsorbent material designed to remove microplastics, nanoplastics and other contaminants from water. Credit: Will Wright, RMIT University
Taking The Technology To Market
The team is working with Indigenous‑owned company Fire and Test Australasia, based in Geelong, Victoria, to explore the possibility of treatment of stormwater and wastewater, including in community settings.
Lead researcher Professor Nicky Eshtiaghi from the School of Engineering said the partnership reflected a shared focus on water stewardship.
“Cleaning and protecting water are deeply important for Indigenous communities as custodians of land and waterways,” she said.
The researchers are also collaborating with Australian company Star Water Group, which has clients in the United States, including California, where tightening regulations are increasing demand for improved microplastics treatment.
Governments in Europe and the US are placing tighter limits on microplastics entering waterways, increasing pressure on industry.
Simonson said the technology showed strong potential for textile and industrial wastewater, municipal treatment systems, stormwater and decentralised water treatment.
“Professor Eshtiaghi and her team have brought deep scientific expertise and a clear grasp of the operational challenge, and we see real potential for this technology in textile and industrial wastewater, municipal treatment and other settings where microplastics and co-contaminants defeat conventional approaches,” he said.
Close-up of the magnetic adsorbent material developed by Professor Nicky Eshtiaghi, Dr Muhammad Haris, Associate Professor Nasir Mahmood and colleagues for wastewater treatment applications. Credit: Will Wright, RMIT University
A Step Change Since 2022
Since 2022, the team expanded the material’s capability, capturing particles from nanoscale plastics through to larger fibres while also removing dissolved contaminants in the same process.
Testing showed up to 90 per cent removal of mixed contaminants, with complete removal of fibres in textile wastewater.
Scaling Up And Improving Affordability
Output increased fivefold through a room‑temperature manufacturing process using fewer costly inputs.
Early analysis suggested costs reduced by about 75 per cent compared to earlier versions. The material can also be reused multiple times, supporting cost‑effective use.
“Our goal was to make the technology effective, practical and affordable at scale,” Eshtiaghi said.
“This includes ensuring the material can be recovered, reused and integrated into existing treatment systems.”
Organisations wanting to partner with RMIT can contact research.partnerships@rmit.edu.au
‘Scalable room-temperature synthesis of a MOF-based magnetic adsorbent for rapid simultaneous removal of PFAS and micro-nanoplastics’ is published in Chemical Engineering Journal (DOI: 10.1016/j.cej.2026.178141).
Rebés's story isn't one of nostalgia - It's a working blueprint for how heritage manufacturers can stay indispensable in a market that rewards speed, certification, and specificity in equal measure. Four million metres of stock mean nothing without the digital printing capability to turn it into something distinctive.
A 150-year name means nothing without the R&D discipline to win a tender for antistatic, carbon-fibre-infused uniform fabric on the first attempt.
Image Credit: Tejidos Rebé
What if the next dress you wore never touched the factory floor?
This is no longer a fringe experiment. It is a maturing production model, backed by genuine material science, real circularity, and an AI-assisted workflow that is becoming more accessible by the month.
Her advice to designers and brands alike is refreshingly practical: start small, get hands-on with an accessible 3D printer, and build fluency before the technology becomes table stakes. The businesses that treat this moment with curiosity, rather than scepticism, will be the ones shaping fashion's next decade rather than reacting to it.
The 2027 FESPA Awards are now open for entry, and the message to businesses across textiles, apparel, interiors and beyond is simple: your work deserves recognition. Every gold winner featured here started in the same place every entrant does - with a project they believed was worth submitting.
As the only independent awards programme with 18 categories dedicated to print and signage, FESPA offers a genuinely global stage, with shortlisted entries displayed at FESPA Global Print Expo in Spring 2027.
Colour Is Too Important to Leave to Chance
Print will always be the part of the garment people see first.
But the sum of all parts — the fabric, the trims, the fasteners, the finish — is what determines whether a design actually delivers on its promise. Brands that continue to treat colour as a single creative decision, rather than a coordinated technical discipline spanning their entire supply chain, will keep paying for it in re-dips, delays, and disappointed design teams.
A Century of Textiles, and an Ever-changing World
Few companies can trace their roots back more than a century and still count themselves among their industry's innovators. Texia, headquartered in Monistrol de Montserrat, Spain, is one of them.
But the story of Texia is not simply one of longevity.
It is a story of continual reinvention. As the textile industry has grown more global and competitive, Texia has repeatedly reshaped its business, investing in technology, developing its own brands, and placing sustainability at the centre of its mission. In doing so, it offers a compelling example of how a heritage manufacturer can lead rather than follow through a period of profound industry change. Image Credit: Texia
What are we craving Ultimately?
The instinct to slow down while simultaneously optimising every measurable aspect of life isn't a passing curiosity. It's a structural response to a world that feels increasingly unstable, and it's reshaping what people expect from their homes, hotels, workplaces and healthcare environments alike.
For the design and manufacturing sectors, this means rethinking both product and process.
The Structual Shift is Real and its Already Here
Volumes are moving east, where digital production is accelerating rapidly. Consumer behaviour has shifted.
Demand is now driven by personalisation, shorter buying cycles, and an expectation of near-instant responsiveness. Regulatory pressure is intensifying, with supply chain transparency now a legal and commercial fact in many markets. And margins? They are under sustained, structural pressure.
This is not a temporary disruption. It is a fundamental reordering of how textile manufacturing must operate.
The Challenge: Standing Firm as the Industry Shifts
The wallpaper landscape has changed dramatically. Digital printing has lowered the barrier to entry, spawning countless direct-to-consumer brands and pushing much of the market towards faster, cheaper production.
At the same time, manufacturing in the UK has grown steadily harder - rising minimum wage, national insurance, energy and substrate costs all bear down on margins. Surface Print have embraced all of these challenges - and stand resolutely prepared for the future.
From Helsinki's printing mill to Paris's Le Marais, discover how Marimekko is scaling a design-led brand with purpose, craft, and bold innovation.
But what makes Marimekko's story compelling is not just its aesthetic legacy?
Athens , Greece – 23 October 2026 – UFABRIK has extended its European distribution network into Greece with the appointment of TSEKMERES GS, an established supplier to the country's textile, screen and large-format digital printing industries.
The agreement brings UFABRIK's digital textile portfolio to a market where UV and Latex technologies remain dominant, but where dye-sublimation is emerging as a significant area of potential growth.
The partnership will focus on providing high-quality textiles for silicone edge graphics (SEG) applications, alongside a wider substrate offering for the Greek market.
São Paulo, Brazil – October 2026 – FESPA has announced that FESPA Brasil 2027 will take place from 1 – 4 March in the Blue and White Pavilions of Expo Center Norte, São Paulo.
The leading digital printing exhibition will bring together the sector's biggest global players to showcase the latest solutions across packaging, textiles, signage, and personalised products.
As one of the most visited exhibitions organised by FESPA, FESPA Brasil 2027 will give visitors access to complete solutions and technological innovations spanning print shops, packaging and labels, textile printing, personalised products, 3D printing, and signage and wide format, among other sectors
New York City, USA, October, 2026 – NedGraphics, a global leader in textile and apparel design software, today announced the official launch of NedGraphics 2027, a major software release designed to bring creativity, technology, and production closer together through a more connected and flexible digital ecosystem.
At the center of NedGraphics 2027 is OPTINEDCloud, a new cloud storage and asset management environment integrated across key NedGraphics applications.
OPTINEDCloud gives design, approval, and production teams a centralized space to store, organize, visualize, share, and manage product development files.
Mönchengladbach, Germany – Monforts will showcase its latest advances in finishing, coating and energy-efficient processing at India ITME 2026, as the region's textile manufacturers increasingly look beyond volume production towards higher-value fabrics.
The German finishing machinery specialist will exhibit in Greater Noida , India at stand A5 in Hall 1 from December 4-9.
Milan, Italy – October 22nd 2026 – Agfa Inkjet Solutions today announced it will present its award-winning Jeti Bronco H3300 HS live at Viscom Italia 2026, taking place 28–29 October at the Allianz MiCo Convention Center.
Visitors can see the hybrid wide-format printer in action at Stand 8 B17/C20, where Agfa will demonstrate its capabilities for sign and display businesses seeking greater productivity without compromising on image quality.
The 3.3-metre Bronco H3300 HS delivers print speeds of up to 450 m²/h while maintaining high image quality, combining the flexibility to handle both rigid and roll media in a single hybrid platform.
Berlin, Germany – 21 October 2026 – NVIDIA today announced that Europe's leading ecosystem partners are adopting the NVIDIA DSX™ AI Factory Platform to build AI factories that minimise water consumption for cooling and use less power for the same AI output.
The platform also helps partners bring new capacity online faster and adapt workload power consumption to support grid reliability.
NVIDIA DSX is a full-stack AI factory reference architecture, co-innovated with the world's leading infrastructure companies, in which compute, networking, storage, software, power and cooling are codesigned as one system.
East Sussex, UK – October 2026 – Vivid Laminating Technologies has announced that Pureprint Group, a leading print and marketing services business, has selected its multi award-winning Veloblade technology for use across its operations.
The decision underscores a shared commitment to innovation and efficiency within the print industry.
Imst – Ostreich – October 2026 – DyStar, a global leader in textile chemistry and innovative solutions, has announced its pivotal role in helping Textildruck Imst (TDI) achieve successful certification of the German "Multitarn" camouflage print.
The achievement, reached within a matter of months despite an ambitious timeline and exceptionally stringent requirements, enabled production to commence on schedule as part of a strategic collaboration with Getzner Textil.
The certification process demanded rigorous standards across colour performance, durability, infrared signature, and safety compliance.
From the outset, DyStar supported TDI by supplying the necessary products, technical expertise, and hands-on application support required to meet these demanding benchmarks.
Milan, Italy – October 2026– Epson will present its latest advancements in signage, UV printing and textile customisation at VISCOM 2026, taking place at Allianz MiCo Milan on 28-29 October.
Visitors can find Epson at Gate 3, Stand G14, where the company's specialists will demonstrate how its newest technologies are helping businesses expand into high-value applications through superior print quality and precise colour management.
As visual communication and personalisation markets continue to evolve at pace, Epson is positioning itself at the forefront of that change.
Leicester, UK – October 2026 – VeriVide is an official RAL Distributor in the United Kingdom, giving UK designers, specifiers and manufacturers direct access to the complete range of RAL colour standard products.
The appointment reinforces VeriVide's commitment to supporting the architecture, interior design, and industrial design sectors with reliable, globally recognised tools for accurate colour communication.
South Normanton – UK – October 2026 – Sun Chemical, a global leader in printing inks, coatings, and pigments, today reinforced the importance of looking beyond colour when selecting dyes for printing inks, urging formulators and manufacturers to weigh performance data alongside colour accuracy to achieve reliable, long-lasting results.
While colour remains a defining factor in dye selection, Sun Chemical emphasises that performance properties are equally critical to a dye's overall suitability for an application.
These include lightfastness, which is shaped by dye concentration, binder composition, substrate, and testing conditions; resistance properties, such as bleed resistance and over-lacquering resistance; and migration behaviour, which can vary depending on the substrate, coating, and storage conditions.
United Kingdom – October 2026 – Textile Skills Centre has announced a new Design to Print Competition in partnership with Prinfab, the UK's leading digital fabric printer.
The competition invites UK schoolchildren aged 5 to 18 to submit original textile designs or artwork for the chance to see their work professionally printed onto fabric.
The initiative aims to give young designers a tangible, industry-standard outcome for their creative work, while introducing them to the practical realities of textile design and digital printing.
Telford, UK – October 2026 – Ricoh UK has announced the return of Print Evolution Live, its flagship industry event, for a fourth consecutive year.
Taking place on 10-11 November 2026 at Ricoh's Telford site, the event will once again bring together leaders from across the print sector to explore the strategic shifts shaping the industry's future.
Karachi – Pakistan – October 2026 – ZIMMER AUSTRIA successfully concluded its participation at IGATEX PAKISTAN 2026, one of the region's leading exhibitions for textile and garment technology.
The event highlighted a growing shift among Pakistani manufacturers toward high-value technical textile production, a trend that aligns closely with ZIMMER AUSTRIA's innovative solutions.
Throughout the exhibition, ZIMMER AUSTRIA demonstrated the capabilities of its #magnoroll and #colaris technologies, both designed to support manufacturers moving into advanced technical textile segments, including coating, printing, and specialty fabric production.
Southend – Essex – October 2026 – Vivid Laminating Technologies Ltd has announced the successful installation of its multi award-winning VeloBlade Nexus cutting system at Guardian Exhibition and Display, a leading name in the exhibition and display industry.
The installation, completed last week, equips Guardian Display with one of the most advanced cutting solutions available, reinforcing the sector's ongoing shift towards greater automation and precision.
Uxbridge, UK – October 2026 – Perfect Colours will host a Celebration in Colour event on Thursday 5 November at the Xerox UK IC Centre in Uxbridge, giving attendees a first-hand look at the new Proficio colour presses in action.
The event will showcase the capabilities of the Proficio range, with live demonstrations featuring a striking collection of fluorescent colours designed to push the boundaries of what print professionals can achieve with colour technology.
Goor – Netherlands – October 2026 – ColGraphix, a company at the forefront of innovation in the transfer paper industry, today announced the appointment of Gijsbert Harmsen as its new Senior Account Manager.
Harmsen brings with him a wealth of industry expertise and an extensive professional network, strengthening ColGraphix's position as it continues to lead the market into a more sustainable and efficient future.
October 2026 – Epson has today featured the availability of the SureColor G9000, the first high-production, roll-to-roll Direct-To-Film (DTFilm) printer in its line-up.
Designed for commercial garment decorators and textile producers, the new printer addresses the industry's growing demand for greater speed, reliability and reduced hands-on maintenance, whatever the production environment.
The SureColor G9000 is built around a complete Epson ecosystem, combining Epson inks, printheads and software with Epson EdgePrint or Fiery Digital Factory RIPs
Frankfurt am Main, 14th October 2026 – With the new premium segment Carpets & Rugs Excellence, the Comfort & Connect area and the Heimtextil Trends 27/28, Heimtextil 2027 is sharpening its offering for a market under pressure.
Running from 12 to 15 January 2027, the leading trade fair for home and contract textiles and textile design will showcase innovations across the entire value chain, from fibres and yarns to designs by international studios, finished collections and complete interior solutions.
Milan, Italy – October 2026 – BARBIERI Electronics, a leading innovator in colour measurement technology, today announced its participation in VISCOM Italia 2026, taking place at Allianz MiCo in Milan on 28–29 October 2026.
The company will exhibit at Booth A14 alongside its Italian distributor, Tecnologie Grafiche, presenting its latest spectrophotometer solutions to the digital printing industry.
Altham – Lancashire – October 2026 – Soyang Europe has announced the appointment of Glen Nunkoo as its new Business Development Manager.
Glen joins the team with over 20 years of industry experience across both hardware and media, and will be responsible for managing customer relationships across the Midlands and North West regions.
Glen's appointment reflects Soyang's ongoing commitment to strengthening its customer relationships and delivering a consistently high standard of service as the business continues to grow.
Clay Cross- UK – October 2026– Resolute DTF today features their R-JET PRO DTF™ UV61-3Di, a UV DTF printer engineered to elevate promotional products with striking three-dimensional effects.
Using advanced tilt print head technology, the new machine produces stunning TPU and Crystal Patch embossed finishes on a wide range of everyday items, offering businesses a new way to differentiate their products in an increasingly competitive market.
SOUTH NORMANTON, UK – October 2026 – Sun Chemical today featured Cinquasia® Magenta D 4200 J, a state-of-the-art Quinacridone pigment engineered specifically for digital ink formulations.
The new pigment delivers vibrant yellowish magenta shades alongside outstanding colour performance, reinforcing Sun Chemical's position at the forefront of pigment innovation for the printing industry.
Ratingen, Germany – October 2026 – Gonzo Design, a full-service advertising specialist covering textile printing, digital printing, signage and vehicle lettering, has invested in Fujifilm's Acuity Triton large-format UV inkjet printer featuring Aquafuze ink technology.
The move marks a significant step in the company's drive to raise print quality, broaden application versatility and improve air quality within its production facility.
Reading – UK – October 2026– Roland DG Europe today highlights the DGXpress ER-641, a dedicated print-only solution designed to help print businesses deliver professional-grade graphics without stretching their budgets.
The new device addresses a growing need in the industry: balancing high-quality output with manageable production costs and everyday workflow demands.
As print businesses look to scale, every investment must work harder to justify its place in day-to-day operations.
The ER-641 has been engineered with this challenge in mind, offering a focused, print-only solution that keeps both initial investment and ongoing running costs firmly in check.
Tokyo – Japan – October 2026 – Klieverik has announced the successful delivery and installation of another GTC131-2000SP FL calendering line, which has safely arrived at its new home with a customer in Japan.
The milestone underscores Klieverik's continued commitment to providing reliable, high-performance machinery to manufacturers across the globe.
Leicester, UK – October 2026 – VeriVide Limited, a leading provider of colour assessment solutions, has confirmed its attendance at the Society of Dyers and Colourists (SDC) Coloration & Finishing Conference 2026, taking place in Bradford on the 15th October.
The company will exhibit throughout the event and deliver presentations on the industry's transition to LED lighting and the evolution of visual and digital colour assessment
Ottawa, Ontario – October 2026 – Corel today announced it will host a live webinar exploring how organisations can unify branding, signage, print and digital work into a single, flexible creative workflow.
The session takes place tomorrow, October 14th , and is open to creative professionals, studio leads and business owners looking to streamline how their teams produce and deliver work across formats.
Bologna, Italy – October 2026 – Valiani, a leading innovator in precision cutting technology, has today announced the launch of its new GEN 2 cutting machine at FAMAART Bologna.
Designed specifically for high-volume matboard production, GEN 2 represents a significant step forward in the industry's pursuit of greater efficiency without compromising on quality.
Fremont – Ca – October 2026 - Fiery, a global leader in digital front end (DFE) technology for print, has announced that the full recording of its webinar, Beyond CMYK: From More Colours to More Impact, is now available on demand.
The session addresses a pressing challenge facing today's commercial print providers: how to move beyond the limitations of standard CMYK to meet rising client demands for bold, brand-accurate colour.