THE RISE OF BIODIVERSITY AND BIO ENGINEERED MATERIALS FOR TEXTILE MANUFACTURE
“Responsibly sourced and sustainable materials remain in short supply globally, and the textile industry cannot yet generate (or recycle) the volume required by the global supply chain across multiple market sectors. Whilst the fashion Industry is often in the spotlight, all textiles must become circular in the long term.” Debbie McKeegan - FESPA Textile Ambassador
WRITTEN BY FESPA TEXTILE AMBASSADOR DEBBIE MCKEEGAN
The Rise of Biodiversity and Bio Engineered Materials for Textile Manufacture
In 2020, global fibre production was calculated to have risen to around 110 million tonnes according to the Textile Exchange, a research group that encourages sustainability. That indicates an almost a doubling of the size of the textile fibre market since 2009.
Global clothing consumption has been estimated at anywhere from 80 to 150 million items a year, of which for every five garments produced, three go to a landfill where synthetic fibres remain for hundreds of years, leaching microfibres into the earth’s surface and our atmosphere as they degrade. We urgently need to rethink and redesign the core fibres that we consume on mass.
Responsibly sourced and sustainable materials remain in short supply globally, and the textile industry cannot yet generate (or recycle) the volume required by the global supply chain across multiple market sectors. Whilst the fashion Industry is often in the spotlight, all textiles must become circular in the long term. We must now rely on science to deliver a solution. In the world of bio-based alternatives the focus on research and development has become ever more intensive, and as the climate crisis grows, solutions are urgently sought to two main problems:
First, discovering new feedstocks that are renewable and are not subject to either intensive farming or depletion of finite resources. And second, to producing new raw materials for textile production that are bio-degradable and make no contribution to the mountains of waste that accumulate from the ever-expanding Textile, Fashion and Décor industries.
Renewable Feedstocks.
The quest for eco-friendly feedstocks has two distinct branches, replacement of traditional cellulosic components, such as cotton and silk, and the substitution of organic polymer feedstocks for sustainable polyester production.
On traditional cellulosic replacement, there has been considerable progress with the introduction of numerous bio-degradable solutions - the science continues to gain pace in this lucrative materials marketplace.
Below we detail some of the new products now on offer, some will expand and dominate specific markets and applications, others will fade. But the most important factor is their emergence and the expansion of their production and widespread availability as adoption increases.
Banana Fibres: Bananatex® is the world’s first durable, technical fabric made purely from the naturally grown Abacá banana plants. Cultivated in the Philippine highlands within a natural ecosystem of sustainable mixed agriculture and forestry, the plant is self-sufficient, requires no pesticides, fertilizer or extra water.
Sea-Weed Fibres: Keel.Labs (formerly AlgiKnit) believes kelp-based fibres can dramatically change fashion’s environmental impact by offering a non-toxic, carbon-neutral material that is both highly versatile and sustainable. Kelp is a large algae that grows abundantly in dense, underwater forests close to shore. AlgiKnit processes kelp, one the fastest growing and most renewable organisms on earth, into functional textiles that can be utilized for garments, accessories, and footwear.
Nettle Circle provides a sustainable regenerative natural fibre that is versatile, high-performing, circular and now traceable with Haelixa marking technology from bark to end consumer product. This next generation natural fibre grows wildly and can be cultivated with a marginal ecological footprint.
Soybean Protein Fibre is from soy pulp, which is an insoluble part of soybeans, and a by-product of tofu and soymilk production, making it environmentally friendly and biodegradable. Known as Soy Silk, the fabric is smooth and soft, it creates a delicate fabric which absorbs and releases moisture very quickly. It is shrink and wrinkle resistant with anti-bacterial properties, often blended with other fibres to increase its drape and strength.
Bamboo Fabrics, of whom China is the largest producer, are eco-friendly, sustainable and responsibly sourced. The bamboo plant grows quickly without using pesticides, excessive water or care. Bamboo regenerates quickly and even cleans the air while it grows. The bamboo fibres are made by manipulating the leaves until it separates into thin threads, these are then spun into thread for weaving or knitting fabrics. Bamboo is the largest member of the grass family, growing up to 35m tall. They are the fastest growing woody plants in the world. This fast growth rate and the fact that bamboo can grow in a range of different climates makes the bamboo plant a sustainable and versatile resource.
Turning the spotlight to Polyester, what are the new developments of note? There has been substantial progress in the development of renewable and biodegradable polymer feedstocks for circular or alternate Polyester fibre production.
Organic Polymer Feedstocks.
Organic polymers are an important source of bio-degradable, renewable Polyesters and are now being intensively developed world-wide. We consider some of these innovations as detailed below:
PLA (Poly Lactic Acid) is a biobased, recyclable, and biodegradable polymer made from annually renewable resources, offering a reduced carbon footprint versus traditional plastics. TotalEnergies Corbion, headquartered in the Netherlands, operates a 75,000 tons per year PLA production facility in Rayong, Thailand, and has recently announced the intention to build a second plant in Grandpuits, France.
Polybutylene Succinate PBS can be produced by combining several monomers (building blocks of the material) originating from renewable plant sources instead of fossil fuels thanks to recent advances in biotechnology. Therefore, instead of petroleum, Kintra sources corn and wheat derived sugar to produce its resins and fibres, which undergo a melt-spinning process similar to polyester, nylon and other synthetic materials. Providing a comparable look, feel and performance without contributing to the problem of microplastic pollution.
New developments for Recycling and the Circular Economy
The fibre manufacturing community is increasingly pursuing a low-carbon circular economy as innovation and serious institutional investment continues to push the agenda forward. In summary we note some of the most recent developments and innovations in the recycling arena.
PET Recycling: South Korean chemical company SK Geo Centric (SKGC) has partnered with SUEZ and Loop Industries to build a recycled polyethylene terephthalate (PET) facility in Europe. The joint venture plant will produce 70,000 million tonnes of virgin quality, fully recycled PET plastic and polyester fibre for the European market.
Circulose: Renewcell is a fast-growing Swedish textile recycling company with a unique technology and a world-class team of people on a mission to change the global textile industry for the better. They plan to recycle the equivalent of more than 1,4 billion t-shirts every year by 2030. Their product is called Circulose®, and they make it out of 100% textile waste. Brands use it to replace high impact raw materials like fossil oil and cotton in their textile products.
Eastman Advanced Circular Recycling Technologies: Eastman plan to invest up to $1 billion in a material-to-material molecular recycling facility in France that would use Eastman’s polyester renewal technology to recycle up to 160,000 tonnes annually of hard-to-recycle plastic waste that is currently being incinerated.
MyReplast™ Upcycling: MyReplast Industries is a Maire Tecnimont Group company, controlled by NextChem and located within the “Circular Economy” cluster on the roadmap for the energy transition. Operating in the recycling of plastic waste, the company utilizes a group-owned technology capable of separating and then combining different polymers present within waste. Separating the polymers, through an optical selection phase (by polymer and by colour) followed by a compounding step, to produce high-quality granules that can replace virgin plastic in various application areas.
Enzyme Engineering: Protein Evolution’s technology iteratively tests, evaluates, and maps tens of millions of unique enzymes to identify the most effective way to recycle waste materials into reusable chemicals. This approach will help to decarbonize industry and will carry significant impact in the emerging bioeconomy as companies, communities and governments are required to meet global sustainability goals in the years ahead. The Protein Evolution team works in tandem with pre-eminent researchers who are pushing the boundaries of protein engineering and materials innovation. The team expects to launch its first commercial partnership by the end of 2022, addressing the needs of global consumer brands seeking to recycle and transform textiles and mixed-plastic waste.
The Bio-Solution for a Better World
As we view the Décor and Fashion industries the panorama of effort, innovation and investment in renewable technologies is truly impressive and has made marked progress in a very short timescale.
With only a limited time to respond, as the options for our planet run out, there are no shortage of players and investors willing to take a role. This is an emerging multi-billion-dollar industry and offers both the planet and the investor - significant reward.
Bio-Based alternatives to fossil fuel Armageddon offer the prospect of a real way forward for the textile industry. Substantive eco-progress from enzymes to plant-based feedstocks signpost a new landscape for material science and the textiles we consume. Which in turn, will also change the technologies and chemistry we utilise to print onto them.
It’s an exciting time for our industry, and we look forward to witnessing significant change for good over the years ahead.
The story of what happens when young designers access digital technology is still being written.
What once was a theoretical sustainability goal seems to have shifted into an active regulatory reality.
Is the Textile Market Finally Recovering?
After a difficult few years, there are genuine reasons for optimism. Duncan was candid about the challenges: "The market for textiles has been very difficult over the last three years. I'm not going to hide the truth there. But the tide is turning.“
A profound shift is currently reshaping the sector
Changing consumer expectations demand greater design diversity, faster turnaround times, and sustainable manufacturing practices.
To thrive, interior brands must adapt their supply chains, bringing production closer to the end consumer and moving away from bulk manufacturing.
Digital textile printing offers a definitive solution to these operational bottlenecks.
Digital transformation doesn't announce itself.
It accumulates - one innovation at a time - until an entire industry looks back and realises the ground has shifted beneath its feet. That's precisely where textiles stands today.
The conversations happening now about AI, automation, sustainability, and digital product passports are not theoretical. They are shaping decisions being made on factory floors and in boardrooms right now.
“By leveraging advanced digital textile printing, Marylene Madou has successfully merged traditional craftsmanship with cutting-edge technology. Her approach offers a blueprint for how independent designers can scale their brands globally while maintaining a minimal environmental footprint.”
From Helsinki's printing mill to Paris's Le Marais, discover how Marimekko is scaling a design-led brand with purpose, craft, and bold innovation.
But what makes Marimekko's story compelling is not just its aesthetic legacy?
The textile industry is undergoing a vital transformation. As the insights from Techtextil and Texprocess reveal, the path forward relies on a combination of sustainable hardware, intelligent chemistry, and seamless digital workflows.
From Zimmer's industrial-scale energy reductions and Stratasys's on-demand 3D embellishments, to Kornit's single-step technical printing and the unified digital ecosystems of NedGraphics and Optitex, the tools for change are here. To stay competitive, brands and manufacturers must adopt these innovations, moving away from fragmented, wasteful processes towards a truly connected, circular economy.
Friedmans stands as a testament to the power of combining traditional textile knowledge with forward-thinking innovation.
“Operating from their UK headquarters, Friedmans now serves a diverse array of sectors, including swimwear, dance, entertainment, sportswear, interior decor, prosthetics, and even pet apparel. With a strategic supply chain that reliably serves clients worldwide”
The apparel decoration industry is decisively moving away from isolated, analogue production tools toward connected digital manufacturing environments.
"Kornit’s unwavering commitment to transformative technology continues to disrupt the status quo. For business leaders and innovators ready to capture the future of apparel manufacturing, the path forward is clear”
The Urgent Need for Sustainability at Scale
The transformation at Coats provides a vital blueprint for the wider textile and apparel sector. True sustainability cannot be achieved in silos. As Dearing emphasised:
“Cross-industry collaboration is the engine of meaningful change. Brands, machinery suppliers, chemical providers, and fibre producers must act as an interconnected ecosystem”
Today’s customers demand superior product quality, real-time data visibility, and lightning-fast turnaround times.
For large-scale garment decorators, managing these expectations while balancing seasonal demand fluctuations - such as the massive surges seen during Black Friday - presents a monumental challenge.
"Relying on transactional vendor relationships and outdated legacy equipment is no longer sufficient to secure long-term stability and growth.”
Printing method is never a secondary detail. It shapes the entire life cycle of a product, from concept to customer. In today’s fashion industry, where margins are tighter and speed matters more than ever, technical knowledge has become a competitive advantage.
“The future of textile design belongs to professionals who can combine creativity with execution, aesthetics with practicality, and vision with production reality”.
Are we witnessing the reinvention of Merch driven by adaptive, digital technologies?
The commercial opportunity presented by printed, personalised merchandise is already a lucrative revenue stream; it is the core driver of growth in a multi-billion-pound industry. And the mandate for print businesses is clear: automate, adapt, and offer undeniable added value, or choose to gradually lose market share.
Powderless DTF is an important area of innovation. It deserves research, investment, and thoughtful development.
“But at its current stage, it often feels like the industry is attempting to commercialize the concept ahead of the underlying chemistry and system readiness”.
All Apparel Manufacturers face an Urgent Mandate: “Automate or be Left Behind”.
Industry leaders like Super Nova Sports and Ryozo International were struggling with severe pre-press bottlenecks and unsustainable fabric waste. By integrating AI Sublimation Software into their workflows, these forward-thinking businesses eliminated manual variable data entry, boosted fabric efficiency to over 80%, and reduced delivery times by more than half, establishing a highly profitable, agile, and environmentally responsible production model.
The Future of Manufacturing belongs to those who Embrace Connected Digital Ecosystems
“Whether you produce garments, car interiors, or home furnishings, the transition from creative concept to production-ready product often remains fragmented. Design teams work tirelessly to develop compelling materials, yet technical teams struggle to interpret these visions without losing data along the way.”
The European digital wallcovering marketplace is expanding at an impressive rate.
“For print professionals and interior designers, this transition presents a distinct set of challenges. Achieving flawless colour consistency, managing complex substrates, and meeting stringent environmental standards are no longer optional extras; they are fundamental requirements for commercial success.”
If you're looking to optimize your website for AI search, hang onto your cowboy hat. It's the Wild West out there. Former (and current) SEO companies see the handwriting on the wall as more search moves from traditional SEO to AEO (answer engine optimisation). Opportunists are popping out of the woodwork.
(There are good options out there, but vet them carefully.)
A swimsuit might start life as a sketch. By the time it reaches the shop floor, dozens of hands have touched it - designers, dye houses, printers, trim manufacturers, quality controllers. Each one interprets colour in their own way, under their own conditions, with their own tools. The result is often a product that looks nothing like the original vision.
Manchester – August 2026 – Premier Digital Textiles today highlights its 2555 Dimout, a versatile, dual-purpose fabric designed to bridge the worlds of fashion and interior design.
With its distinctive silver finish and subtle sheen, the fabric is positioned as a premium material for designers and makers operating across both industries.
2555 Dimout features a smooth silver surface that lends itself naturally to elegant occasionwear, flowing garments, and bold statement pieces.
Its fluid drape and refined aesthetic make it particularly well-suited to summer collections, where lightness and visual impact are equally valued.
Oswestry – Shropshire – August 2026 - Fujifilm Ink, the UK-based global supplier of UV inkjet technology, has strengthened its partnership with China Print Supplies UK Ltd (CPS), becoming the recognised ink supplier for the company's range of Dlican UV printing systems.
The partnership follows the successful rollout of Fujifilm Ink's thermoforming flexible ink technology, reinforcing the company's commitment to delivering high-performance, application-specific ink solutions for the wide-format print market.
Birmingham, UK – July 2026 – swissQprint UK is set to exhibit at The Print Show 2026, taking place from 29 September to 1 October at the NEC in Birmingham, Great Britain.
Visitors can find the swissQprint UK team at Stand P420, where they will have the opportunity to experience the company's latest flatbed printing technology firsthand.
Paris, France – August 2026 – Optitex and NedGraphics will present their integrated design and manufacturing solutions at Première Vision Paris, taking place from 1st to 3rd September 2026 at Parc des Expositions, Paris Nord Villepinte, France.
Visitors can find the companies at Booth 3L11 in Hall 3, Smart Creation Area.
The joint appearance marks a significant opportunity for textile brands and manufacturers to experience first-hand how NedGraphics and Optitex deliver a unified workflow — one that connects textile design, colour refinement, and end product development within a single, seamless process.
Emmerich am Rhein, Nordrhein-Westfalen – August 2026 – Brother Industrial EMEA has announced the launch of its GTX300, a hybrid direct-to-garment (DTG) and direct-to-film (DTF) garment printer that the company says sets a new benchmark for textile print quality.
To mark the occasion, Brother Industrial EMEA is offering eligible print professionals across the EMEA region a complimentary demo package to experience the printer's capabilities firsthand.
FREMONT, CA. August , 2026 – Fiery, a global leader in digital printing technology, has announced the launch of a new free online course designed to help print professionals master colour management for direct-to-film (DTF), direct-to-garment (DTG), and UV printing workflows.
The course, Fiery Specialty Production 301 v1: Colour Management Basics in Digital Factory, is now available on Fiery's learning platform at no cost.
Geretsried, Bavaria, August 2026 – RUDOLF, a leading textile chemistry company, has announced the launch of its Summer Campaign, a dedicated series exploring advanced finishing technologies designed to enhance the performance, comfort, and protection of swimwear and summer apparel.
The campaign arrives at a time when the demands placed on modern swimwear are greater than ever. Prolonged sun exposure, repeated contact with water, and the physical demands of summer activities require textiles that go beyond attractive design.
RUDOLF's Summer Campaign aims to demonstrate how the right finishing technologies can meet these challenges head-on.
Frankfurt, Germany – August 2026 – Heimtextil, the world's leading trade fair for home and contract textiles, has announced the launch of the Italian Lounge, a dedicated exhibition space celebrating Italian craftsmanship at its 2027 edition.
Taking place from 12 to 15 January in Frankfurt, the Italian Lounge will be located in the heart of Hall 4.1 and will bring together manufacturers of decorative and furniture fabrics, leather, and fibres and yarns under one roof
Pembrokeshire, Wales – August 2026 – National Weaving, a family-owned textile manufacturer with nearly four decades of experience, was honoured to receive a visit from HRH The Princess Royal, President of the UK Fashion & Textile Association (UKFT), at its Pembrokeshire facility.
The visit celebrated the company's longstanding contribution to British textile manufacturing and its commitment to combining traditional craftsmanship with modern, sustainable production methods.
PHILADELPHIA – July 2026 – PRINTING United Alliance, in partnership with The Foundation for Graphic Communication Education (The FGCE), continues to expand its popular Student Day experience at PRINTING United Expo 2026, taking place Thursday, September 24, at the Las Vegas Convention Center.
Designed to introduce students to the limitless career opportunities across the printing industry, this year's program will feature enhanced career development programming, expanded mentorship opportunities, and greater one-on-one engagement with industry professionals throughout the day's activities.
Dublin, Ireland – July 2026 – digitalprint.ie, Ireland's trusted supplier of wide format printing equipment and media, has completed the delivery and installation of two Epson SureColor S9100 printers to long-standing customer iGraphic, based in Newtownards.
The installation, which required careful planning and specialist logistics to position both machines on a first-floor mezzanine, marks another milestone in a valued, ongoing partnership.
Johannesburg – July – 2026 Experience the latest digital printing, vehicle wrapping and paint protection films at the FESPA Africa and Sign Africa Johannesburg Expo, where industry meets opportunity.
The event is taking place from 8-10 September 2026.
Arhus – Denmark – July 2026 – Mikkelsen Innovation ApS has announced that its FASTSEWN™ 3.3M has been named the recipient of the 2026 Pinnacle Award in the Technology category by PRINTING United Alliance.
The recognition highlights the machine's role in automating the final manual step in textile graphics production, combining automated sewing and laser cutting with keder application for silicone edge graphics (SEG).
Barbieri electronics is strengthening its leadership team as the company prepares for its next phase of development.
With Viktor Lazzeri, who has played a key leadership role within the company for many years and is well known to customers and partners as Chief Operating Officer, Barbieri has appointed him COO and Co-Managing Director, further strengthening its leadership capacity to support innovation, international growth and even closer customer relationships.
Altrincham – Cheshire – July 2026 - Friedmans Ltd and Funki Fabrics have announced the arrival of new print designs, expanding their existing collection with a fresh range of trend-led prints available across a broad selection of premium fabric bases.
The launch offers fashion designers, production teams, and creative professionals a timely opportunity to explore new possibilities for their upcoming collections.
Leicestershire - July 2026 – Vivid Laminating Technologies is pleased to announce that HG Graphics, a leading provider of building signage and vehicle wraps across Yorkshire and the UK, has invested in a fully integrated print and cutting solution combining the VelobladeNexus with the latest Onyx Graphics software.
The installation, supplied and commissioned by Vivid Laminating Technologies, sees three printers feeding directly into HG Graphics' new VelobladeNexus with auto tool change — all operating under full Onyx Graphics software integration. The solution was delivered and set up on-site as part of a complete, ready-to-run installation
Wednesday, July 29, 2026 - RENNES, France—Pointcarre, the French American textile CAD company known for its jacquard and dobby weaving software, has developed a new module dedicated to wall to wall carpet and carpet tile design.
The launch addresses a gap left when APSO, the longtime CAD platform for the tufting industry, discontinued its software more than two years ago, leaving mills and carpet designers without a clear path forward.
Accrington, UK, July 29, 2026: Soyang Europe has expanded its direct-to-film (DTF) range with the launch of a paper-based transfer media that offers an environmentally conscious alternative to conventional PET transfer film.
Named Soyang DTF Paper, the new product is a single-sided release-coated transfer paper featuring anti-static treatment and a hot-peel release.
Designed for use with digital inkjet DTF printers running water-based pigment inks, the media can be recycled through standard paper waste streams, helping print businesses reduce plastic waste.
London – July 2026 – Perfect Colours, a leader in print management solutions, has highlighted the availability of Print Factory, a unified Raster Image Processor (RIP) designed to deliver consistent, high-quality colour output across multiple printers.
The solution addresses one of the print industry's most persistent challenges: maintaining colour accuracy and consistency across different devices and workflows.
Las Vegas, NV – July 2026 – Caldera, a leading provider of print workflow software solutions, has announced its participation in PRINTING United Expo 2026, taking place 23–25 September 2026 at the Las Vegas Convention Center.
Visitors can find Caldera at Booth C1469, where the company will showcase its latest innovations in print workflow automation, colour management, and apparel decoration.
Ghent – Belgium – July 2026 – Kongsberg Precision Cutting Systems (Kongsberg PCS), a leading provider of digital cutting solutions, is calling on print, signage, and packaging businesses to embrace advanced materials as a strategic pathway to new markets, higher-value products, and more sustainable growth.
As competitive pressures intensify across the manufacturing sector, Kongsberg PCS is positioning its versatile, high-performance digital cutting solutions as essential tools for businesses looking to expand their capabilities and future-proof their operations.
The company's message is clear: businesses that invest in advanced material processing today are best placed to lead their industries tomorrow.
Bracknell – Berkshire-July 2026 – UFABRIK’s Soft Blackback Textile, a premium material engineered for tension frames, interiors, retail environments, exhibitions, soft signage, and beyond.
Designed to meet the exacting demands of modern display and signage professionals, the new textile sets a new benchmark for quality, versatility, and performance in the industry
Crewe, UK – July 2026 – Hybrid Services Ltd, the UK's leading Mimaki distributor, has announced two dedicated demonstration weeks at its Crewe showroom this August, giving businesses across the print industry the opportunity to explore the latest Mimaki technology firsthand.
Taking place from 3rd to 7th August and 17th to 21st August 2026, the August Demo Weeks are designed to help businesses make informed investment decisions by experiencing Mimaki's wide format print solutions in a hands-on, pressure-free environment.
Florida – July - 2026 – Agfa Inkjet Solutions has announced its return as a Keynote Sponsor of the 2026 Wide Format Summit, marking the sixth consecutive year the company has supported the industry's premier gathering.
The event is scheduled to take place from 27 to 29 July 2026 at the Hyatt Regency Coconut Point Resort and Spa in Bonita Springs, Florida.
Clay Cross – UK – July 2026 – Resolute highlights its new DTF Pneumatic Twin Platen Heat Press, a professional-grade heat press designed to help print shops increase output, improve consistency, and reduce downtime across high-volume production runs.
The machine's dual-platen design allows operators to prepare the next garment while the current one is being pressed, significantly reducing idle time and increasing throughput.
This makes it particularly well-suited to print shops running large direct-to-film (DTF) and transfer print operations, where speed and consistency are critical.
Mexico City, Mexico – July 2026 – FESPA Mexico, the premier event for the print and signage industry in Latin America, is set to take place from 10–12 September at Centro Citibanamex, Mexico City.
The event will bring together professionals, suppliers, and innovators from across the region to explore the latest technologies and trends shaping the future of print.
TOKYO, Japan, July 27, 2026 - Seiko Epson Corporation (TSE: 6724, "Epson") is proud to announce that its production facility, PT. Indonesia Epson Industry (IEI), has achieved Platinum recognition under the Responsible Business Alliance (RBA) Validated Assessment Program (VAP), based on audits conducted by RBA-approved independent third-party firms.
This achievement underscores Epson's commitment to corporate social responsibility (CSR) within its global supply chain.
London, UK – July 2026 – The UK Fashion and Textile Association (UKFT) has announced its participation at two of Asia's most prominent textile trade events: Intertextile Shanghai Apparel Fabrics (25–27 August 2026) and CINTE Techtextil China (1–3 September 2026).
The organisation will promote and support British companies across both shows, connecting international buyers, brands, and industry partners with the full breadth of UK textile expertise.
Kufstein – Austria – July 2026 – Zimmer Austria will exhibit at CAITME 2026, the Central Asian International Textile Machinery Exhibition, taking place from 8 to 10 September 2026 in Tashkent, Uzbekistan.
The company will be present at Pavilion 1, Booth B50, represented through its regional agent, Textile Technologies & Services LLC.
Munich, Germany – July 2026 – FESPA has announced that the European Sign Expo will return to Munich, Germany, from 6 to 9 April 2027.
The event will bring together signage and visual communication professionals from across Europe and beyond, providing a dedicated platform for the industry to connect, collaborate, and explore the latest innovations shaping the sector.
European Sign Expo is widely regarded as the continent's foremost event for the signage industry.