MARKET SHIFTS AND EMERGING TRENDS DRIVING CHANGE FOR THE PRINT AND TEXTILE COMMUNITY
“Global events and shifting consumer behaviours continue to upend traditional business models across the supply chain. Whether technical or strategic – the textile industry must adapt and invest to minimise risk and reap the commercial benefits of technology. Only then can it strategically meet market demands and adapt at speed to address shifting consumer behaviours.” Debbie McKeegan for PIXEL to PARCEL
ARTICLE WRITTEN BY DEBBIE McKEEGAN: ORIGINALLY FEATURED ON PIXEL to PARCEL
Global events and shifting consumer behaviours continue to upend traditional business models across the supply chain.
At all tiers, change is the only way to meet the manufacturing challenges that face an industry historically built for mass production at volume and continued growth.
Whether technical or strategic – the textile industry must adapt and invest to minimise risk and reap the commercial benefits of technology. Only then can it strategically meet market demands and adapt at speed to address shifting consumer behaviours.
The Age of AI and Machine Learning
AI’s transformative effect across the supply chain continues to drive the agenda and to harness and streamline manufacturing prowess. Its impact cannot be understated. Across all sectors of business – AI is liberating time, creativity and production viability.
In a market challenged by so many factors: Sustainability, Supply chain volatility, Consumer preferences and Localised economic instability – AI reinstates power into the hands of the orchestrator, the principal host and its strategic partnerships.
Generative AI is now a valuable tool for the creative, its not something to be feared, on the contrary – AI fires the imagination and will rewire creativity in the years ahead.
AI Tools simplify and automate the design process, software such as Six Atomic utilise AI to take 2D garment patterns and render as a 3D visualisation, the software allows for acute styling and adjustment to the body shape and the required fit. Six Atomic plugs seamlessly into many of the preferred design tools such as Clo and Browzwear.
The technology drastically reduces the time is takes to create apparel garments, along with helping to create a more sustainable design and production process through reducing the need for samples, therefore reducing waste.
New technologies continue to rewire creativity and to build on existing process. Metail is a ground-breaking software leveraging AI – a leap that is set to revolutionise both garment manufacture and the retail experience. The technology bridges the gap between digital and physical – and can apply 3D garments in real-time onto real-life models. Their latest developments focus on the application of apparel clothing onto moving video.
Investing in AI is no longer optional, it’s an intrinsic tool for commercial success regardless of where you exist within the supply chain. For the print community it offers a window into the workflow of production, it controls manufacturing equipment for maximum efficiency and importantly removes or reduces waste.
Seamless technology – Single Step Solutions and Print Innovations
To meet shifting consumer preferences the buyer (retailer or consumer) is shifting to on-demand production. Digital technology now readily delivers digitally printed textile product personalisation and customisation at speed.
However, fulfilling the demand for such products has created a new tier of innovation for MIS. Print management information systems must now manage the entire order workflow electronically without human intervention wherever possible. Only then can we manufacture print-on-demand at scale efficiently.
The perfect storm for digital textile printing machinery, software and technology. Once connected to an intelligent, efficient workflow solution – Print on Demand can thrive. Delivering customised production at any volume across the R2R marketplaces for sewn products and the ever-expanding DTG Direct to Garment sector. AI and ML play a vital role in this process where creativity, digital textile machinery, product data, print information and order fulfilment are entwined and in tune. As a result, strategic technology partnerships become increasingly important in the manufacturing sector.
Using KornitX technology, Hype a British streetwear brand catering to a wide range of consumers, create and design bright coloured garments. Their bold in-your-face impressions adorn t-shirts, children’s wear backpacks, hoodies, intimate apparel, and other pieces, and are sold via the company’s own website and a growing network of retailers, including Next, Zalando, BooHoo, John Lewis, and The Very Group.
“We like to see ourselves as a lifestyle brand,” said Jade Bell, Marketing Manager at Hype. “Hype is all about showcasing your individuality and personality, so we like to make sure our core band DNA values are showcased through our products. We have the Gen Z audience, the Millennials, the younger generation and also adults – a huge range of customers.”
At this time, Hype is operating in 27 countries; while the UK remains their largest market, the company is experiencing considerable growth throughout Europe and even the Far East. They are currently integrating with Walmart and Costco, as well, to expand the brand’s footprint in the United States.
Smart Circular Design – Rewiring Creativity
On-demand technologies continue to drive the creator economy. Designers are empowered by digital process, freeing them from mass production. Utilising a digital workflow, products can be created, amended, and visualised in real-time across continents.
3D rendering applications offer accurate product simulation shortening the creative and manufacturing workflow to deliver accurate specifications for materials, style and production data on-demand, removing the wasteful requirement for sampling. When connected to an e-commerce environment – physical products are only manufactured at the point of sale – removing the requirement to hold finished stock.
Utilising the latest technology, the product designer can control both design and production variables in real time, to ensure that the products they create meet and deliver the specifications of a circular economy.
Online and off, designers are harnessing the digital spectrum to showcase and engage with their customers. As they do so, they push the boundaries of creativity, spawning a new generation and a powerful creative economy.
Knowledge share across the supply chain is now essential. Whilst the products we create are increasingly in tune with consumer preferences, we also have to engage with our manufacturing partners and dive deeper into the supply chain to understand the fibres and the processes of production we specify – to ensure that we maximise their longevity – only then can we truly design and manufacture for a circular economy.
Nearshore/Onshore – Shifting Market Behaviours
Macroeconomic shifts continue to drive the restructure of the textile supply chain. All tiers are affected, and in such a volatile market – business seek to find stability.
Strategic partnerships are key. Stock is to be avoided, in part due to the fluctuating cost of manufacture, and also to meet the consumers need for continual gratification and the speed with which trends ebb and flow.
Seasonal production is no longer a viable option – regardless of scale for the retail community. Holding large stocks (as we did in the past) is commercial suicide for the retail community. Product launches are no longer seasonal, and the most successful business in this sector now replenish their stocks to meet market demand.
These trends are increasingly upending traditional supply routes. Lengthy lead-times are not acceptable. Buyers must dance to the tune of the consumer, and to do so they must accelerate their design and production cycles. To do so, they must relocate production and localise supply and product fulfilment. Again, strategic partnerships are critical for stability and an important investment for on-demand production and commercial success.
Supply Chain Visibility – Transparency and Traceability
The demand for data cannot be underestimated. Across the supply chain.
End-to-end, manufacturing clarity is essential. Every component of production must be aligned if we are to manufacture on-demand. Harnessing this information not only delivers manufacturing efficiency but it’s also an important factor in our community’s journey towards sustainability.
“Greenwashing” is a dangerous game for the retail community, products must now be certified and increasing regulated. Across the globe, product regulation must be adhered to and accredited. Digital transparency must be delivered within all partnerships if we are to meet the needs of our customers and retain market share. Investing in transparency and traceability will cement prosperity.
Recycling and Reducing Waste
Do we truly understand the products we create? Are we designing products with innate circularity at their conception?
Material science is a key part of the designer’s specification process, and a greater understanding of the fabrics and production processes we source is now demanded – we have to be certain that the products we offer our consumers are environmentally efficient.
A growing trend for “repurposing” means much more (put simply) than rental. As stated earlier, if we understand the fibre content of the products, we create we make the correct fabric choices and can then specify the most environmentally efficient method of printed production to ensure that we design and create for “end-of-life”.
In doing so we can then harness the true value of the materials we choose. As recycling and fibre identification technologies advance, they continue to deliver accurate information and new materials for the designer to make an informed choice at product conception.
Lenzing and Sodra recently partnered to create OnceMore®, a new recycling method that makes it possible to process and recycle a blend of cotton and polyester. Their award-winning collaboration resulted in a new raw material, a bio-textile that can be manufactured at scale and has since been recognised as a valuable innovation and a step towards zero textile waste supply chain. As part of the cooperation, the companies shared their knowledge with each other and now continue to jointly develop processes to enable the wider use of cellulose-based used textiles on a commercial scale.
In summary, consumer behaviour and global retail challenges are driving innovation. Across the supply chain – from the software driving automated manufacturing and print technology, to new raw biomaterials and recycling – innovations are focussed on environmental process to deliver commercial success.
To weather the storm and to secure a viable future for our businesses – the textile industry must innovate, re-equip and seek to invest in and build strategic partnerships across the supply chain.
Rebés's story isn't one of nostalgia - It's a working blueprint for how heritage manufacturers can stay indispensable in a market that rewards speed, certification, and specificity in equal measure. Four million metres of stock mean nothing without the digital printing capability to turn it into something distinctive.
A 150-year name means nothing without the R&D discipline to win a tender for antistatic, carbon-fibre-infused uniform fabric on the first attempt.
Image Credit: Tejidos Rebé
What if the next dress you wore never touched the factory floor?
This is no longer a fringe experiment. It is a maturing production model, backed by genuine material science, real circularity, and an AI-assisted workflow that is becoming more accessible by the month.
Her advice to designers and brands alike is refreshingly practical: start small, get hands-on with an accessible 3D printer, and build fluency before the technology becomes table stakes. The businesses that treat this moment with curiosity, rather than scepticism, will be the ones shaping fashion's next decade rather than reacting to it.
The 2027 FESPA Awards are now open for entry, and the message to businesses across textiles, apparel, interiors and beyond is simple: your work deserves recognition. Every gold winner featured here started in the same place every entrant does - with a project they believed was worth submitting.
As the only independent awards programme with 18 categories dedicated to print and signage, FESPA offers a genuinely global stage, with shortlisted entries displayed at FESPA Global Print Expo in Spring 2027.
Colour Is Too Important to Leave to Chance
Print will always be the part of the garment people see first.
But the sum of all parts — the fabric, the trims, the fasteners, the finish — is what determines whether a design actually delivers on its promise. Brands that continue to treat colour as a single creative decision, rather than a coordinated technical discipline spanning their entire supply chain, will keep paying for it in re-dips, delays, and disappointed design teams.
A Century of Textiles, and an Ever-changing World
Few companies can trace their roots back more than a century and still count themselves among their industry's innovators. Texia, headquartered in Monistrol de Montserrat, Spain, is one of them.
But the story of Texia is not simply one of longevity.
It is a story of continual reinvention. As the textile industry has grown more global and competitive, Texia has repeatedly reshaped its business, investing in technology, developing its own brands, and placing sustainability at the centre of its mission. In doing so, it offers a compelling example of how a heritage manufacturer can lead rather than follow through a period of profound industry change. Image Credit: Texia
What are we craving Ultimately?
The instinct to slow down while simultaneously optimising every measurable aspect of life isn't a passing curiosity. It's a structural response to a world that feels increasingly unstable, and it's reshaping what people expect from their homes, hotels, workplaces and healthcare environments alike.
For the design and manufacturing sectors, this means rethinking both product and process.
The Structual Shift is Real and its Already Here
Volumes are moving east, where digital production is accelerating rapidly. Consumer behaviour has shifted.
Demand is now driven by personalisation, shorter buying cycles, and an expectation of near-instant responsiveness. Regulatory pressure is intensifying, with supply chain transparency now a legal and commercial fact in many markets. And margins? They are under sustained, structural pressure.
This is not a temporary disruption. It is a fundamental reordering of how textile manufacturing must operate.
The Challenge: Standing Firm as the Industry Shifts
The wallpaper landscape has changed dramatically. Digital printing has lowered the barrier to entry, spawning countless direct-to-consumer brands and pushing much of the market towards faster, cheaper production.
At the same time, manufacturing in the UK has grown steadily harder - rising minimum wage, national insurance, energy and substrate costs all bear down on margins. Surface Print have embraced all of these challenges - and stand resolutely prepared for the future.
From Helsinki's printing mill to Paris's Le Marais, discover how Marimekko is scaling a design-led brand with purpose, craft, and bold innovation.
But what makes Marimekko's story compelling is not just its aesthetic legacy?
The word "toxic" carries weight. It conjures danger, harm, and things best avoided.
“Yet in the textile industry - Where between 3,000 and 10,000 chemicals move through the supply chain, a reflexive fear of the term is one of our biggest obstacles to progress.”
This article distils the key takeaways and what buyers, designers, and brands should be asking right now.
What Is the Digital Product Passport?
At its core, a Digital Product Passport is a digital record attached to a physical product - For a printed textile product, this means the DPP would capture data on the substrate, inks and dyes used, the printing process and technology, chemical compliance, environmental impact (including water and energy use), supply chain traceability, and end-of-life instructions.
The Market Gap that Changed Everything
Future Fashion was founded in 2019, timed deliberately to coincide with a pivotal moment in global textile technology: the commercial launch of the EFI Reggiani BOLT Single-Pass digital printing system.
The founders recognised that single-pass architecture had fundamentally changed what was industrially possible - and that Pakistan's domestic market had yet to catch up.
Print is no longer defined by the inefficiencies that once characterised it…as advances in production processes and technology have significantly improved its environmental performance.
Taran Rai, Corporate Sustainability Manager at Epson explains why?
The story of what happens when young designers access digital technology is still being written.
What once was a theoretical sustainability goal seems to have shifted into an active regulatory reality.
Is the Textile Market Finally Recovering?
After a difficult few years, there are genuine reasons for optimism. Duncan was candid about the challenges: "The market for textiles has been very difficult over the last three years. I'm not going to hide the truth there. But the tide is turning.“
A profound shift is currently reshaping the sector
Changing consumer expectations demand greater design diversity, faster turnaround times, and sustainable manufacturing practices.
To thrive, interior brands must adapt their supply chains, bringing production closer to the end consumer and moving away from bulk manufacturing.
Digital textile printing offers a definitive solution to these operational bottlenecks.
Digital transformation doesn't announce itself.
It accumulates - one innovation at a time - until an entire industry looks back and realises the ground has shifted beneath its feet. That's precisely where textiles stands today.
The conversations happening now about AI, automation, sustainability, and digital product passports are not theoretical. They are shaping decisions being made on factory floors and in boardrooms right now.
“By leveraging advanced digital textile printing, Marylene Madou has successfully merged traditional craftsmanship with cutting-edge technology. Her approach offers a blueprint for how independent designers can scale their brands globally while maintaining a minimal environmental footprint.”
The textile industry is undergoing a vital transformation. As the insights from Techtextil and Texprocess reveal, the path forward relies on a combination of sustainable hardware, intelligent chemistry, and seamless digital workflows.
From Zimmer's industrial-scale energy reductions and Stratasys's on-demand 3D embellishments, to Kornit's single-step technical printing and the unified digital ecosystems of NedGraphics and Optitex, the tools for change are here. To stay competitive, brands and manufacturers must adopt these innovations, moving away from fragmented, wasteful processes towards a truly connected, circular economy.
Friedmans stands as a testament to the power of combining traditional textile knowledge with forward-thinking innovation.
“Operating from their UK headquarters, Friedmans now serves a diverse array of sectors, including swimwear, dance, entertainment, sportswear, interior decor, prosthetics, and even pet apparel. With a strategic supply chain that reliably serves clients worldwide”
The apparel decoration industry is decisively moving away from isolated, analogue production tools toward connected digital manufacturing environments.
"Kornit’s unwavering commitment to transformative technology continues to disrupt the status quo. For business leaders and innovators ready to capture the future of apparel manufacturing, the path forward is clear”
Bologna, Italy – October 2026 – Valiani, a leading innovator in precision cutting technology, has today announced the launch of its new GEN 2 cutting machine at FAMAART Bologna.
Designed specifically for high-volume matboard production, GEN 2 represents a significant step forward in the industry's pursuit of greater efficiency without compromising on quality.
Fremont – Ca – October 2026 - Fiery, a global leader in digital front end (DFE) technology for print, has announced that the full recording of its webinar, Beyond CMYK: From More Colours to More Impact, is now available on demand.
The session addresses a pressing challenge facing today's commercial print providers: how to move beyond the limitations of standard CMYK to meet rising client demands for bold, brand-accurate colour.
Dubai, UAE – October 2026 – FESPA’s exclusive Leadership Exchange event, FLEX, will return to Dubai on 26 November 2026, bringing together senior figures from across the Middle East's print and signage industries for a day of strategic dialogue and knowledge sharing.
London, UK – October 2026 – Sanderson Design Group plc. has today announced a robust first-half performance, underpinned by sustained momentum across its business and the continued delivery of its focused growth strategy.
The results highlight the Group's growing international reach and its commitment to building a more resilient, sustainable future for the design industry.
Revenue for the period rose to £51.4m, while statutory profit before tax increased by 69% to £2.5m.
Adjusted profit before tax also grew significantly, up 47% to £3.3m
Telford, UK – October 2026 – China Print Supplies UK Ltd has today released its new 2026 price list, introducing new machines, updated bundle deals, and revised pricing across its range of print, cutting, and finishing solutions.
The updated catalogue reflects the company's ongoing commitment to equipping print businesses with reliable, cost-effective equipment as the industry continues to evolve.
With new machinery added to the lineup and refreshed bundle options, China Print Supplies UK aims to make it easier for customers to find solutions tailored to their operational needs and budgets.
Burgdorf, Switzerland / Geretsried, Germany, October, 2026 – Long-lasting performance textiles require solutions that address a wide range of consumer expectations, from lasting freshness and comfort to reliable protection against the elements.
SANITIZED and RUDOLF are highlighting their latest innovations, demonstrating how specialized textile technologies can support the functional durability and wearability of modern apparel.
Altstätten, Switzerland – October 2026 – Zünd has announced that it will open its headquarters in Altstätten, Switzerland, on 18–19 November 2026 for Zünd Technology Days 2026, a two-day event dedicated to live technology demonstrations, expert presentations, and an in-depth look at real-world production processes.
Milan, Italy – October 2026 – Agfa has confirmed its participation in Viscom Italia 2026, the international trade fair dedicated to visual communication and graphic arts.
The event will take place on 28–29 October 2026 at the Allianz MiCo Convention Center in Milan, with doors open daily from 9:30 AM to 6:00 PM.
Watford = Hertfordshire- October – 2026 – Epson has announced that selected SureColor printers and inks are now covered by the 3M™ MCS™ Warranty, marking a significant step forward in the company's ongoing commitment to delivering durable, high-performance graphics solutions.
The certification reinforces the longstanding relationship between Epson and 3M, and underscores both companies' shared dedication to quality and innovation in the graphics industry.
London, UK – October 2026 – ARTSTHREAD has today launched the Public Vote for its seventh annual Global Creative Graduate Showcase, inviting audiences worldwide to discover and support the next generation of creative talent.
The vote is now live at vote.artsthread.com, giving the public the opportunity to engage directly with graduating work from across the globe.
Shanghai – China -October 2026 – BARBIERI Electronics, a global leader in professional colour measurement solutions, has announced its participation in ALL IN PRINT CHINA 2026, taking place from 12–16 October 2026 at the Shanghai New International Expo Centre.
The company will exhibit alongside its partner, Beijing Dingli Xintong Technology Co. Ltd, at Booth N2A219, where COO and Co-Managing Director Viktor Lazzeri will meet with customers, partners and print professionals from across the industry
Bracknell – Berkshire - October 2026 - UFABRIK has added IGEPA Hungária to its expanding European distribution network, bringing its digital textile portfolio to customers across Hungary through one of the country’s leading print and visual communications suppliers.
The agreement will see IGEPA Hungária introduce the UFABRIK range to customers from its operations in Budapest and Nyíregyháza, with local stockholding, technical support, and wide-format availability up to 5 metres.
New York – NY – October 2026 – Optitex, a global leader in fashion technology solutions, has announced a significant update to its CutPlan software, introducing Purchase Order (PO) Wise capability as part of its O/26.1 release.
The new feature allows manufacturers to plan multiple Purchase Orders for the same style independently, addressing a long-standing inefficiency within the cut planning process.
United Kingdom – September 2026 – Inkloft, a new specialist digital printing business founded by Gary Weyman and Andy Hancock, has announced its entry into the direct-to-film (DTF) market.
The company has been appointed as a distributor of DuPont™ Artistri® DTF products, including P1600 inks and Artistri Jettable Adhesive JA1100, both now available to purchase online through inkloft.co.uk.
Peterborough, UK – October 2026 – Snuggle Ltd has today reaffirmed its commitment to redefining industrial garment decoration, combining high-volume output with environmentally responsible production methods at its Peterborough facility.
The announcement highlights the company's investment in water-based pigment ink digital printing technology, a move designed to cut the environmental footprint of large-scale apparel decoration without compromising on quality.
At the core of Snuggle's operation is industrial water-based pigment ink digital printing, which replaces the chemical-heavy alternatives traditionally used across the sector.
Manchester – October 2026 – Premier Digital Textiles has today highlighted its 33130 Achill Natural Linen, a beautifully understated fabric defined by timeless texture and natural character.
The luxurious fabric reflects the company's ongoing commitment to quality materials that serve both designers and the environment
Gent – Belgium – October 2026 – Kongsberg Precision Cutting Systems has announced its participation in India CorrExpo 2026, following a successful week exhibiting at PRINTING United Expo 2026.
The company will showcase its latest advancements in digital cutting and routing technology, demonstrating how businesses across print, display, packaging and signage can achieve greater precision, productivity and scalability.
The event will take place from 14 to 16 October 2026 at the Bombay Exhibition Centre in Mumbai, where Kongsberg will be exhibiting at Booth B80, Hall 4.
Konica Minolta Business Solutions (UK) Ltd has reinforced its two‑ decade partnership with Epson by expanding the range of Epson wide format print technologies now available for live demonstration at its UK Client Engagement Centre (CEC) in Dunstable.
The move reflects Konica Minolta’s commitment to supporting the UK commercial print sector with a broader, more versatile portfolio and giving customers hands‑on access to leading solutions.
Coalville – Leicestershire – October 2026 – Innotech Digital & Display has concluded a successful first-time exhibition at The Print Show, held at the NEC over three days, unveiling its new Black Display Hardware Collection and demonstrating its materials in action through a series of industry partnerships.
The event marked a significant milestone for Innotech, offering the company its first opportunity to engage directly with the wider print community on this platform.
Visitors to the stand were able to explore product samples, view the newly launched Black Display Hardware Collection, and speak with the Innotech team about the latest developments in digital and display materials
Las Vegas – Nv -October 2026 – Durst Group AG has confirmed its first US customer orders for the Durst P5 350 CORE, following the system's debut at PRINTING United Expo.
The announcement caps a milestone year for the platform, which launched earlier in 2026 at FESPA Global Print in Barcelona and went on to win an EDP Award ahead of its US introduction.
The P5 350 CORE drew significant attention from attendees throughout the Expo, with interest converting directly into sales as the first American customers placed their orders on the show floor.
Altrincham- Cheshire – UK – October 2026 – Funkifabrics, a provider of fabrics for fashion and design, today highlighted a striking collection of garments created by renowned designer [theofficialglobegirls], which prominently features its textiles.
The collection showcases the versatility and quality of Funkifabrics' materials, reinforcing the company's commitment to supporting bold, creative expression across the fashion industry.
The collaboration, shared across Funkifabrics' social media channels, has already generated significant engagement from the fashion community, with many praising the craftsmanship and visual impact of the designs.
Belgrade, Serbia – October 2026 – Brother Industrial EMEA today announced that its GTX300 digital textile printer has been awarded the prestigious Gold Seal Award at Grafima 2026, the 46th International Fair of Graphic, Paper and Creative Industries, held in Belgrade.
The machine received top honours in the category "Digital Printing Machines for Textile Materials up to 160cm Wide", as judged by the fair's expert panel.
The Gold Seal Award recognises outstanding quality, innovation and professional capability within the graphic and textile printing industries.
Shanghai, China – October 2026 – FabricVision, a global innovator in textile production, has marked the successful completion of its first full year of operations, announcing ambitious expansion plans across both China and Europe.
The milestone was celebrated last week during China Expo in Shanghai, where the company convened with its team at Jinmao to review achievements and set strategic priorities for the year ahead.
The company's first year has been defined by rapid growth and deepening customer relationships, according to leadership.
Rapidity, a nearly 40-year-old London print and communications specialist, needed finishing equipment capable of matching the speed and complexity of its growing client roster, which includes Arsenal, Shell, and Aston Martin.
By partnering with Vivid Laminating Technologies and investing in three Veloblades, two Matrix systems, and an Easymount unit, Rapidity strengthened its production capabilities while maintaining the meticulous quality standards that have defined the business since 1986.
Klagenfurt - Austria – October 2026– Zimmer Austria, a global leader in textile printing and coating solutions, will be at IGATEX Pakistan 2026, one of the region's premier textile machinery exhibitions.
The company will exhibit its latest digital printing, screen printing, and coating technologies from 15–18 October 2026, at Hall 2, Booth F-2-09, in Karachi, Pakistan
Returning for the fifth time to Manchester’s GNCCF (Great Northern Contemporary Craft Fair) are the GREEN GRADS,** 20 of the brightest of the UK’s new wave of eco-activists who have just graduated from universities all over the country, from Falmouth to Glasgow. The Fair runs from Thursday October 15 (private view) to Sunday October 18 (closes 4pm).
GREEN GRADS in the NORTH are taking over the 46 “changing cubicles” with their distinctive framework of blue cast iron, that fringe the gallery of Pool C, in the splendid Victoria Baths, Manchester. There is also a shop, curated by Laura Wigham, GREEN GRAD of 2024, with exclusive arts and crafts by GREEN GRAD makers from previous years.
Crewe, Cheshire – October 6th 2026 – Hybrid Services Ltd, the UK and Ireland distributor for Mimaki, has announced three dedicated demo days at its Crewe showroom, giving businesses a further opportunity to see the latest Mimaki machines in action.
Running from Tuesday 13th to Thursday 15th October, the drop-in sessions follow the machines' debut at The Print Show 2026 at the NEC Birmingham and are designed for those who missed the event, or want more time to explore the technology at their own pace.
Chesterfield, UK – October 2026 – Resolute DTF, a leading provider of direct-to-film printing solutions, has concluded its participation in The Print Show, last week, with an overwhelmingly positive response from attendees.
The event gave the company an opportunity to showcase its latest innovations in DTF and UV DTF printing technology to print businesses from across the industry.
Visitors to the Resolute DTF stand were given hands-on access to the company's expanding product range, including its R-JET PRO DTF and UVi-3D UV DTF printers, alongside its portfolio of inks, films, and finishing equipment.
Capurso, Italy – October - 2026 – Agfa Inkjet Solutions today announced that Digibux Print, an Italian digital print specialist, has invested in the Jeti Bronco H3300 HS, a 3.3-metre wide-format hybrid UV LED inkjet printer.
The investment marks a significant step in Digibux Print's evolution from digital print specialist to industrial production powerhouse, as the company expands its production capabilities to meet changing customer demands.
London, UK – 25 September 2026 – Sanderson Design Group PLC (AIM: SDG), the luxury interior furnishings group, today announced a 10-year licensing agreement with Dunelm for Designers Guild, the luxury interiors brand acquired by Dunelm in April 2025.
Under the Agreement, Sanderson Design Group has been granted the sole licence to design, manufacture and sell Designers Guild wallpapers, fabrics and paint worldwide.
The Agreement grants Sanderson Design Group access to Designers Guild's extensive archive design library, alongside the opportunity to create new designs under the brand, in exchange for a royalty fee paid to Dunelm