Fashion For Good And Arvind Limited Launch Future Forward Factories India ─ Embedding Innovation In Manufacturing
3 June 2025 : AMSTERDAM – Fashion for Good and Arvind Limited today announced the launch of Future Forward Factories India, an ambitious initiative with two interconnected components: developing a comprehensive blueprint for sustainable textile manufacturing and constructing a groundbreaking physical facility that brings these innovations to life, with expected 93% reduction in GHG emissions compared to conventional manufacturing operations.
This initiative focuses on transforming Tier 2 factories – the backbone of the supply chain – into operations that are both environmentally responsible and economically viable.
The initiative delivers an open-source, modular blueprint for sustainable tier-2 textile manufacturing that can be adopted industry-wide, while simultaneously building a first-of-its-kind physical facility that demonstrates these principles in action.
This physical implementation represents a significant investment in bringing innovations from concept to reality, putting “money on the ground” to prove the commercial and environmental viability of these approaches.
The physical facility implementation would be subject to gap/bridge funding support from the Industry stakeholders to make some of the leading innovations financially viable.
Anchor Partner Arvind’s New Proposed Physical Facility To Be Developed In Gujarat (India) For Cotton Woven And Knit Will Achieve Up To 93% Reduction In GHG Emissions Compared To Conventional Manufacturing Operations.
This pioneering facility is projected to save roughly 60 litres of water per kg of fabric while operating as the industry’s first near net-zero textile production centre.
Along with potential impact savings, the blueprint will also focus on maximising the commercial feasibility of a Future Forward Factory, and assessing and developing subsidies, grants and incentives to close the viability gap.
“We are at a critical moment in the fashion industry’s journey towards sustainability. With Future Forward Factories, we are taking decisive action to catalyse transformation through both knowledge-sharing and practical implementation,” said Katrin Ley, Managing Director of Fashion for Good. “By developing a blueprint and working with Arvind to build an actual facility that addresses the challenges of Tier 2 manufacturing – where 52% of the industry’s CO2 emissions and almost all water and chemical usage occurs – we can demonstrate real-world solutions that drive systemic change.”
The Blueprint Incorporates Strategies To Achieve Multiple Environmental And Social Objectives:
Near net-zero operations through renewable energy integration and advanced process technologies
Water Positive status by minimising fresh water usage and incorporating waterless technologies for processes like printing
ZDHC level 3 compliance for chemicals, with potential reductions in the quantity of chemistry required due to innovative processes
Improvement in wastewater quality through novel treatment approaches, leading to a lower requirement for wastewater treatment
Developing a framework to enable a Just Transition that ensures worker well-being as factories adopt climate-friendly technologies.
“We are excited to join forces with Fashion for Good to drive this transformative initiative,” said Punit Lalbhai, Vice Chairman of Arvind Limited. “As a leader in the textile sector, Arvind is committed to pioneering sustainable manufacturing practices. By both developing a blueprint and constructing an innovative facility, we will demonstrate how these technologies can be implemented at scale to address the textile industry’s biggest environmental challenges.”
The initiative is already backed by a strong network of committed funders; Laudes Foundation, Apparel Impact Institute, and IDH, and on-ground partners; Bluwin, Wazir Advisors, Grant Thornton Bharat and Sattva Consulting, who are collaborating to deliver actionable insights and practical solutions.
Future Forward Factories is launching at the Global Fashion Summit 2025 to socialise both the blueprint development and facility construction aspects of the initiative.
The open-source blueprint is scheduled for public release in September 2025, providing the industry with a practical roadmap.
Beyond this facility, Future Forward Factories extends an open invitation to other suppliers to partner with Fashion for Good in developing further blueprints tailored to a range of manufacturing setups, expanding the industry’s collective ability to scale innovative practices.
For more information about Future Forward Factories, please visit the Fashion for Good website.
About Fashion For Good
Fashion for Good unites the entire fashion ecosystem, from brands, retailers, suppliers, innovators, and funders to collaborate and drive change towards a circular and regenerative industry.
At the core, Fashion for Good enables disruptive innovators on their journey to scale, providing hands-on support, connection to capital, and access to a robust ecosystem of experts.
This work brings the most powerful innovations to market faster to create decisive system change.
This transformative work is made possible by the support of Laudes Foundation, co-founder William McDonough and corporate partners, adidas, Arvind Limited, BESTSELLER, Birla Cellulose, C&A, CHANEL, Inditex, Kering, Levi Strauss & Co., Norrøna, ON, Otto Group, Paradise Textiles, Patagonia, PDS Limited, PVH Corp., Reformation, Shahi Exports, Target, Teijin Frontier, and Zalando.
The story of what happens when young designers access digital technology is still being written.
What once was a theoretical sustainability goal seems to have shifted into an active regulatory reality.
London UK – July – 2026 – British digital fabric printing company Prinfab has been commissioned to produce a commemorative tea towel to celebrate the landmark birthday of iconic English fashion designer Sir Paul Smith.
The bespoke piece features hand-drawn self-portraits of nearly 800 members of his team, making it a truly unique tribute to one of Britain's most celebrated designers.
The tea towel, gifted to Sir Paul Smith by his team, showcases the creative spirit that has long defined the Paul Smith brand.
Manchester – August 2026 – Premier Digital Textiles today highlights its 2555 Dimout, a versatile, dual-purpose fabric designed to bridge the worlds of fashion and interior design.
With its distinctive silver finish and subtle sheen, the fabric is positioned as a premium material for designers and makers operating across both industries.
2555 Dimout features a smooth silver surface that lends itself naturally to elegant occasionwear, flowing garments, and bold statement pieces.
Its fluid drape and refined aesthetic make it particularly well-suited to summer collections, where lightness and visual impact are equally valued.
Oswestry – Shropshire – August 2026 - Fujifilm Ink, the UK-based global supplier of UV inkjet technology, has strengthened its partnership with China Print Supplies UK Ltd (CPS), becoming the recognised ink supplier for the company's range of Dlican UV printing systems.
The partnership follows the successful rollout of Fujifilm Ink's thermoforming flexible ink technology, reinforcing the company's commitment to delivering high-performance, application-specific ink solutions for the wide-format print market.
Birmingham, UK – July 2026 – swissQprint UK is set to exhibit at The Print Show 2026, taking place from 29 September to 1 October at the NEC in Birmingham, Great Britain.
Visitors can find the swissQprint UK team at Stand P420, where they will have the opportunity to experience the company's latest flatbed printing technology firsthand.
Paris, France – August 2026 – Optitex and NedGraphics will present their integrated design and manufacturing solutions at Première Vision Paris, taking place from 1st to 3rd September 2026 at Parc des Expositions, Paris Nord Villepinte, France.
Visitors can find the companies at Booth 3L11 in Hall 3, Smart Creation Area.
The joint appearance marks a significant opportunity for textile brands and manufacturers to experience first-hand how NedGraphics and Optitex deliver a unified workflow — one that connects textile design, colour refinement, and end product development within a single, seamless process.
Emmerich am Rhein, Nordrhein-Westfalen – August 2026 – Brother Industrial EMEA has announced the launch of its GTX300, a hybrid direct-to-garment (DTG) and direct-to-film (DTF) garment printer that the company says sets a new benchmark for textile print quality.
To mark the occasion, Brother Industrial EMEA is offering eligible print professionals across the EMEA region a complimentary demo package to experience the printer's capabilities firsthand.
FREMONT, CA. August , 2026 – Fiery, a global leader in digital printing technology, has announced the launch of a new free online course designed to help print professionals master colour management for direct-to-film (DTF), direct-to-garment (DTG), and UV printing workflows.
The course, Fiery Specialty Production 301 v1: Colour Management Basics in Digital Factory, is now available on Fiery's learning platform at no cost.
Geretsried, Bavaria, August 2026 – RUDOLF, a leading textile chemistry company, has announced the launch of its Summer Campaign, a dedicated series exploring advanced finishing technologies designed to enhance the performance, comfort, and protection of swimwear and summer apparel.
The campaign arrives at a time when the demands placed on modern swimwear are greater than ever. Prolonged sun exposure, repeated contact with water, and the physical demands of summer activities require textiles that go beyond attractive design.
RUDOLF's Summer Campaign aims to demonstrate how the right finishing technologies can meet these challenges head-on.
Frankfurt, Germany – August 2026 – Heimtextil, the world's leading trade fair for home and contract textiles, has announced the launch of the Italian Lounge, a dedicated exhibition space celebrating Italian craftsmanship at its 2027 edition.
Taking place from 12 to 15 January in Frankfurt, the Italian Lounge will be located in the heart of Hall 4.1 and will bring together manufacturers of decorative and furniture fabrics, leather, and fibres and yarns under one roof
Pembrokeshire, Wales – August 2026 – National Weaving, a family-owned textile manufacturer with nearly four decades of experience, was honoured to receive a visit from HRH The Princess Royal, President of the UK Fashion & Textile Association (UKFT), at its Pembrokeshire facility.
The visit celebrated the company's longstanding contribution to British textile manufacturing and its commitment to combining traditional craftsmanship with modern, sustainable production methods.
PHILADELPHIA – July 2026 – PRINTING United Alliance, in partnership with The Foundation for Graphic Communication Education (The FGCE), continues to expand its popular Student Day experience at PRINTING United Expo 2026, taking place Thursday, September 24, at the Las Vegas Convention Center.
Designed to introduce students to the limitless career opportunities across the printing industry, this year's program will feature enhanced career development programming, expanded mentorship opportunities, and greater one-on-one engagement with industry professionals throughout the day's activities.
Dublin, Ireland – July 2026 – digitalprint.ie, Ireland's trusted supplier of wide format printing equipment and media, has completed the delivery and installation of two Epson SureColor S9100 printers to long-standing customer iGraphic, based in Newtownards.
The installation, which required careful planning and specialist logistics to position both machines on a first-floor mezzanine, marks another milestone in a valued, ongoing partnership.
Johannesburg – July – 2026 Experience the latest digital printing, vehicle wrapping and paint protection films at the FESPA Africa and Sign Africa Johannesburg Expo, where industry meets opportunity.
The event is taking place from 8-10 September 2026.
Arhus – Denmark – July 2026 – Mikkelsen Innovation ApS has announced that its FASTSEWN™ 3.3M has been named the recipient of the 2026 Pinnacle Award in the Technology category by PRINTING United Alliance.
The recognition highlights the machine's role in automating the final manual step in textile graphics production, combining automated sewing and laser cutting with keder application for silicone edge graphics (SEG).
Barbieri electronics is strengthening its leadership team as the company prepares for its next phase of development.
With Viktor Lazzeri, who has played a key leadership role within the company for many years and is well known to customers and partners as Chief Operating Officer, Barbieri has appointed him COO and Co-Managing Director, further strengthening its leadership capacity to support innovation, international growth and even closer customer relationships.
Altrincham – Cheshire – July 2026 - Friedmans Ltd and Funki Fabrics have announced the arrival of new print designs, expanding their existing collection with a fresh range of trend-led prints available across a broad selection of premium fabric bases.
The launch offers fashion designers, production teams, and creative professionals a timely opportunity to explore new possibilities for their upcoming collections.
Leicestershire - July 2026 – Vivid Laminating Technologies is pleased to announce that HG Graphics, a leading provider of building signage and vehicle wraps across Yorkshire and the UK, has invested in a fully integrated print and cutting solution combining the VelobladeNexus with the latest Onyx Graphics software.
The installation, supplied and commissioned by Vivid Laminating Technologies, sees three printers feeding directly into HG Graphics' new VelobladeNexus with auto tool change — all operating under full Onyx Graphics software integration. The solution was delivered and set up on-site as part of a complete, ready-to-run installation
Wednesday, July 29, 2026 - RENNES, France—Pointcarre, the French American textile CAD company known for its jacquard and dobby weaving software, has developed a new module dedicated to wall to wall carpet and carpet tile design.
The launch addresses a gap left when APSO, the longtime CAD platform for the tufting industry, discontinued its software more than two years ago, leaving mills and carpet designers without a clear path forward.
Accrington, UK, July 29, 2026: Soyang Europe has expanded its direct-to-film (DTF) range with the launch of a paper-based transfer media that offers an environmentally conscious alternative to conventional PET transfer film.
Named Soyang DTF Paper, the new product is a single-sided release-coated transfer paper featuring anti-static treatment and a hot-peel release.
Designed for use with digital inkjet DTF printers running water-based pigment inks, the media can be recycled through standard paper waste streams, helping print businesses reduce plastic waste.
London – July 2026 – Perfect Colours, a leader in print management solutions, has highlighted the availability of Print Factory, a unified Raster Image Processor (RIP) designed to deliver consistent, high-quality colour output across multiple printers.
The solution addresses one of the print industry's most persistent challenges: maintaining colour accuracy and consistency across different devices and workflows.
Las Vegas, NV – July 2026 – Caldera, a leading provider of print workflow software solutions, has announced its participation in PRINTING United Expo 2026, taking place 23–25 September 2026 at the Las Vegas Convention Center.
Visitors can find Caldera at Booth C1469, where the company will showcase its latest innovations in print workflow automation, colour management, and apparel decoration.
Ghent – Belgium – July 2026 – Kongsberg Precision Cutting Systems (Kongsberg PCS), a leading provider of digital cutting solutions, is calling on print, signage, and packaging businesses to embrace advanced materials as a strategic pathway to new markets, higher-value products, and more sustainable growth.
As competitive pressures intensify across the manufacturing sector, Kongsberg PCS is positioning its versatile, high-performance digital cutting solutions as essential tools for businesses looking to expand their capabilities and future-proof their operations.
The company's message is clear: businesses that invest in advanced material processing today are best placed to lead their industries tomorrow.
Bracknell – Berkshire-July 2026 – UFABRIK’s Soft Blackback Textile, a premium material engineered for tension frames, interiors, retail environments, exhibitions, soft signage, and beyond.
Designed to meet the exacting demands of modern display and signage professionals, the new textile sets a new benchmark for quality, versatility, and performance in the industry
Crewe, UK – July 2026 – Hybrid Services Ltd, the UK's leading Mimaki distributor, has announced two dedicated demonstration weeks at its Crewe showroom this August, giving businesses across the print industry the opportunity to explore the latest Mimaki technology firsthand.
Taking place from 3rd to 7th August and 17th to 21st August 2026, the August Demo Weeks are designed to help businesses make informed investment decisions by experiencing Mimaki's wide format print solutions in a hands-on, pressure-free environment.
Florida – July - 2026 – Agfa Inkjet Solutions has announced its return as a Keynote Sponsor of the 2026 Wide Format Summit, marking the sixth consecutive year the company has supported the industry's premier gathering.
The event is scheduled to take place from 27 to 29 July 2026 at the Hyatt Regency Coconut Point Resort and Spa in Bonita Springs, Florida.
Clay Cross – UK – July 2026 – Resolute highlights its new DTF Pneumatic Twin Platen Heat Press, a professional-grade heat press designed to help print shops increase output, improve consistency, and reduce downtime across high-volume production runs.
The machine's dual-platen design allows operators to prepare the next garment while the current one is being pressed, significantly reducing idle time and increasing throughput.
This makes it particularly well-suited to print shops running large direct-to-film (DTF) and transfer print operations, where speed and consistency are critical.
Mexico City, Mexico – July 2026 – FESPA Mexico, the premier event for the print and signage industry in Latin America, is set to take place from 10–12 September at Centro Citibanamex, Mexico City.
The event will bring together professionals, suppliers, and innovators from across the region to explore the latest technologies and trends shaping the future of print.
TOKYO, Japan, July 27, 2026 - Seiko Epson Corporation (TSE: 6724, "Epson") is proud to announce that its production facility, PT. Indonesia Epson Industry (IEI), has achieved Platinum recognition under the Responsible Business Alliance (RBA) Validated Assessment Program (VAP), based on audits conducted by RBA-approved independent third-party firms.
This achievement underscores Epson's commitment to corporate social responsibility (CSR) within its global supply chain.
London, UK – July 2026 – The UK Fashion and Textile Association (UKFT) has announced its participation at two of Asia's most prominent textile trade events: Intertextile Shanghai Apparel Fabrics (25–27 August 2026) and CINTE Techtextil China (1–3 September 2026).
The organisation will promote and support British companies across both shows, connecting international buyers, brands, and industry partners with the full breadth of UK textile expertise.
Kufstein – Austria – July 2026 – Zimmer Austria will exhibit at CAITME 2026, the Central Asian International Textile Machinery Exhibition, taking place from 8 to 10 September 2026 in Tashkent, Uzbekistan.
The company will be present at Pavilion 1, Booth B50, represented through its regional agent, Textile Technologies & Services LLC.